RCA LED32B30RQD User Manual

Also see for LED32B30RQD: User manual User manual

LED LCD TVDVD COMBINATIONUser's ManualEnglish Part No.: RN0332R0179MADE FOR TODAYLED32B30RQDMODELDate of PurchasePlease register your product at www.rca.comPlease keep your sales receipt and keep the record of the serial numberand the date of purchase in order to receive warranty parts and service.The serial number is located at the back of the TV.Serial NumberCongratulations on your purchase! As you enjoy your new product,please keep these safety tips in mind :The IssueThe home theater entertainment experience is agrowing trend and larger flat panel displays andpopular purchases.However, flat panel displays are not always supportedon the proper stands of installed according to themanufacturer’s recommendations.Flat panel displays that are inappropriately situatedon dressers, bookcases, shelves, desks, speakers,chests or cats may fall over and cause injury.1 2 2 3Wall Mounting : IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :- Use a mount that has been recommended by the display manufacturer and/or listed by an independentlaboratory (such as UL,CSA,ETL).- Follow all instructions supplied by the display and wall mount manufacturers.- If you have any doubts about your ability to safely install your flat panel display, contact your retailer aboutprofessional installation.unsure, contact a professional installer.- A minimum of two people are required for installation. Flat panel displays can be heavy.This Manufacturer Cares!The consumer electronics industry is committed tomaking home entertainment enjoyable and safe.Tune Into Safety- One size does NOT fit all. follow the manufacturer'srecommendation for the safe installation and use ofyour flat panel display.- Carefully read and understand all enclosedinstructions for proper use of this product.- Don't allow children to climb on or play withfurniture and television sets.- Don't place flat panel displays on furniture that caneasily be used as steps, such as a chest of drawers.- Remember that children can become excited whilewatching a program, especially on a "larger than life" flatpanel display. Care should be taken to place or installthe display where it cannot be pushed, pulled over, orknocked down.- Care should be taken to route all cords and cablesconnected to the panel display so that they cannot bepulled or grabbed by curious children.Caution and Warning!CHILDSAFETYIt makes A Difference How and WhereYou Use Your Flat Panel DisplayChild Safety GuideCONTENTS0707Channel Bar 08Adjusting Volume 08EPG (Electronic Program Guide) 08Selecting Input Source 07OSD Menu Operations 08Turning On and OffChoosing TV ChannelBasic OperationsChild Safety Guide 02Caution and Warning 02Safety Precautions 04Cable Connections 05Side Panel Connections 05Connecting AV Composite video device 05TV Signal Connection 05Connecting YPbPr Component device 06Keypad and Front Panel 07Connecting HDMI device 06Keypad Buttons 0706Front Panel 07TV Jacks Explanation 06Check Accessories 05Setup TV Table Stand 05Select TV Location 05Preparation for Your New TV 05Connection and Using 0507¡Muchas gracias por su uso del presente producto!Cuando usted disfruta de su nuevo producto, por favor tengaen cuenta los consejos de seguridad:Posibles Problemeas- La experiencia de entretenimiento de cine en casaes una tendencia creciente y los grandes monitoresde pantalla plana son muy populares.embargo, los monitores de pantalla plana no sehan instalado siempre en los soportes adecuados oinstalado de acuerdo con las recomendaciones defabricante.- Los monitores de pantalla plana que se haninstalado inadecuadament en tocadores, estanterías,estantes, escritorios, oradores, baúle s o carros sepueden caer y causar el daño corporal.Montaje de Pared: SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE- Use una montura que se ha recomendadop or el fabricante de monitor y/o listado por un laboratorioindependiente(como U L, CSA, ETL).- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantalla plana,contacte a su distribuidor para la instalación profesional.- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la paredno son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque deceniza. Si usted está inseguro, contacte a un instalador profesional.- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.¡Al Fabricante le Importa- La industria electrónica del consumidor estácomprometida a hacer el entretenimiento de casaagradable y seguro.Ajustar Hasta Seguridad- Un tamaño fijo NO es adecuado para todos. siga lasrecomendaciones de fabricante para la instalación segura yel uso de su monitor de pantalla plana- Lea con cuidado y entienda todas las instruccionesadjuntas para el uso propio de este producto.- No permita a los niños a subir al equipo o jugar conmuebles y televisiones.- No cloque los monitores de pantalla plana en el mueblequese puede usar fácilmente como escalón, así como unacómoda.- Recuerde que los niños pueden llegar a ser excitados al veruna programación, especialmente en el monitor de pantallaplana "más grande que vida". El cuidado se tiene queempezar por poner o instalar el moniotr donde no se puedeempujar, detener al castado del camino ni echar abajo.- El cuidado se tiene que empezar por encaminar todoslos cordones y cables conectados al monitor de pantallaplana para que no se puedan tirar o agarrar conectadosal monitor de pantalla plana para que no se pueden tirar oagarrar por los niños curiosos.!SEGURIDADDE NIÑOS:El Cómo y Doónde Usted usar SuMonitor de Panntalla PlanaMarca La DiferrenciaFCC NoticeGuía de seguridad para niñosFcc InformationThis equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCrules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordancewith the instructions, may ca use harmful interference to radioCommunications.However, there is no Guarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and the receiver.- Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician forhelp.Device complies with FDA radiation performance standards, 21CFR subchapter.Caution: (Invisible) Laser Radiation when open.Do not stare into beam.Choose Your ConnectionsTV LED32B30RQD supports various connections to otherdevices (such as DVD, VCR, Set-top box, etc.). Please follow thetable to choose the cables which adapt to your device.Note: HDMI, the HDMI logo, and High-Definition MultimediaInterface are trademarks or registered trademarks of HDMILicensing LLCCaution: Unplug the AC cord when you connect other devices toTV.Connecting AV Composite device (Good Video Quality)Composite connector will be shared with Component Y connector.To connect a composite AV device, such as a DVD player, followthese steps:1.Connect the COMPOSITE jack on the side of TV to the videooutput jacks of device via video cable (yellow).2.Connect the L-AUDIO-R jacks on the side of TV to the audiooutput jacks of device via audio cable.Notice the left channel jack and plugs are white and the rightchannel jack and plugs are red.Note: AV signal belongs to composite video. This kind of videosignal has regular good display quality.Composite Video ConnectionThe picture below is an example of a connection using thecomposite video jack.The first step in connecting your TV is obtaining the signal. YourTV LED32B30RQD has a back panel, which allows you to receiveanalog and/or digital television channels via ANT/CABLE jack.Before connecting your TV, determine using an antenna or a cableservice to obtain the signal.A. AntennaConnect the antenna to TV via coaxial cable on ANT/CABLE jackof the back panel. You are ready to receive air local digital andanalog channels.B. Cable TV serviceConnect the cable TV wall jack to TV via coaxial cable onANT/CABLE jack of the back panel. You are ready to receive off-airlocal digital and analog channels.C. Set-Top BoxIf you use a set-top box, you may need to call your cable companyor satellite service provider, which use a special connection, pleaserefer to the user’s guide of set-top box.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water. For example, do not usenear a laundry tub, in a wet basement, or near a swimming pool,and the like.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance withthe manufacturer’s instructions. Slots and openings in the cabinetback or bottom are provided for ventilation, to ensure reliableoperation of the TV and to protect it from overheating. Theseopenings must not be blocked or covered. The openings shouldnever be blocked by placing the TV on a bed, sofa, rug, or othersimilar surface.8. Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers) thatproduce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than theother. A grounding-type plug has two blades and a third groundingprong. The wide blade or the third prong is provided for yoursafety. If the provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinchedparticularly at plugs, convenience receptacles, and the point wherethey exit from the apparatus.11. Only use attachments/accessories specified by themanufacturer.12. Use only with cart, stand, tripod, bracket, or table specified bythe manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatuscombination to avoid injury from tip-over.A TV and cart combination should be moved with care. Quickstops, excessive force, and uneven surfaces may cause the TV andcart combination to overturn.13. Unplug this apparatus during lightning storms or when unusedfor long periods of time.For added protection for this TV receiver during a lightning storm,or when it is left unused for long periods of time, unplug it from thewall outlet and disconnect antenna or cable system.This will prevent damage to the TV due to lightning and power linesurges.14. Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way, suchas power-supply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or hasbeen dropped.15. This TV should be operated only from the type of power supplyindicated on the rating label.If customer is not sure the type of power supply in your home,consult your appliance dealer or local power company. For TVremote control battery power, refer to the operating instructions.16. The TV set shall not be exposed to dripping or splashing. Noobjects filled with liquids, such as vases, shall be placed on the TV set.HEAD PHONE: Connect a 3.5mm headphone for personal audio.USB: Connect your USB storage device to enjoy music/photo fileson your TV. (Also used for service purpose).HDMI INHDMI1/DVI, 2: (High-Definition Multimedia Interface) It provides anuncompressed digital connection that carries both video and audiodata by way of an integrated mini-plug cable.MHL: (Mobile High-Definition Link) To standard HDMI input, transmitthe video/audio from portable electronic device (cellphone,digitalcamera, digital-video camera,) to TV set.ARC: (Audio Return Channel) Adopted in TV output of digital audio, can beconnected to the device supporting ARC, transmit the TV sound to the device.COMPONENT Y/Pb/Pr: Connect a device that has componentvideo jacks, such as a DVD player. To access device connectedto the Y/Pb/Pr jack, press the INPUT button on your remote; thenpress the up/down arrow to select Component. Press the OK buttonat last to confirm.Y/Pb/Pr (Component Video): They provide good picture qualitybecause the video signal is separated into three components. Usethree video-grade or component video cables for the connection.When using Y/Pb/Pr, make sure you connect left and right audiocables to the AUDIO IN R/L jacks.L-AUDIO-R, COMPOSITE: Connect an AV device that hascomposite video jacks, such as a VCR or a DVD player. To accessdevice connected to these jacks, press the INPUT button on yourremote; then press the up/down arrow to select AV. Press theENTER button at last to confirm.AUDIO IN L: Left audio channel connection. The left audioconnector is usually white. For mono audio sources, be sure touse the left AUDIO INPUT.AUDIO IN R: Right audio channel connection. The right audioconnector is usually red.ANT/CABLE: Connect to receive the signal from your antenna orcable via coaxial cable.Digital Audio out: Connect a coaxial cable for digital audiooutput.Connecting HDMI device(Best Video Quality)To connect a HDMI device, such as a DVD player, please Connectthe HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the outputjacks of device via HDMI cable.To connect a DVI device, via DVI port of PC or Device and HDMIjack of TV:Front PanelPower/Standby Indicator: Light up in red when the TV is instandby mode. Light out when the TV is on.Remote Control Sensor: Remote control IR sensor, whichreceives infrared ray sent by remote control.Codes for Cox Communications: 0178Codes for Comcast: 10178Codes for Dish Network: 627Codes for Fios Verizon: 0205, 0057, 0493, 0775Keypad ButtonsIf you cannot locate your remote, you can use the keypad buttonson your TV to operate many TV features.Connecting YPbPr Component device(Better Video Quality)To connect a component device, such as a DVD player, followthese steps:1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV tothe video output jacks of device via video cable (green, blue andred).2.Connect the L-AUDIO-R jacks on the side of TV to the audiooutput jacks of device via audio cable.Notice the left channel jack and plugs are white and the rightchannel jack and plugs are red.Note: Y/Pb/Pr jacks are component video. This kind of video signalhas better display quality.Component Video ConnectionThe picture below is an example of a connection using the componentvideo jack.17. Never push objects of any kind into this TV through openingsas they may touch dangerous voltage or other electrical parts thatcould result in fire or electric shock. Never spill liquid of any kind intothe TV.18. Unplug the TV from the wall outlet before cleaning. Do not useliquid or aero cleaners. Use a damp cloth for cleaning.19. This TV should never be placed near or over a radiator or heatresource. This TV should not be placed in a built-in installation suchas a bookcase or rack unless proper ventilation is provided or themanufacturer's instructions have been adhered to.20. Do not place this TV on an unstable cart, stand, tripod, bracket,or table. The TV may fall, causing serious injury to someone, andserious damage to the appliance.21. Do not attempt to service this TV by yourself because openingor removing covers may expose you to dangerous high voltage orother hazards. Refer all servicing to qualified service personnel.22. This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) this device maynot cause harmful interference, and (2) this device must acceptany interference received, including interference that may causeundesired operation.23. WARNING: To prevent injury, this apparatus must be securelyattached to the floor/wall in accordance with the installationinstructions.24. To reduce the risk of electric shock, the grounding of center pinof plug must be maintained.25. If an outside antenna or cable system is connected to the TV,be sure the antenna or cable system is grounded to provide someprotection against voltage surges and built-up static charges.Section 810 of the National Electrical Code, ANSI/NFPA NO.70,provides information with respect to proper grounding of the mastand supporting structure, grounding of the lead-in wire to anantenna discharge unit, size of grounding conductors, location ofantenna discharge unit, connection to grounding electrodes, andrequirements for the grounding electrodes. (See figure A)54 5 6 6 7Remote Control SensorPower/Standby IndicatorSafety StrapCaution: Pushing, pulling or climbing on the TV may cause the TVfalling. Do not let children climb or hang on the TV. Always place theTV on a sturdy, level, stable surface that can hold the weight of TV.And if possible, secure the TV according to the instruction below(Note: The fastening components such as screws are not suppliedwith TV).Step one: Insert the M6 mounting screws into the upper two wallmounting screw holes and fasten them (Figure B).Step two: Insert anchors to wall and connect the bolts and anchorswith ropes or chains (Figure C).Before Turning On TVCheck AccessoriesCheck the accessories that are packed with your TV.(refer to Quick Start Guide)Setup TV Table StandPlease refer to Quick Start Guide to carry out stand installing.Select TV LocationSelect a flat, stable table to place your TV set. Please follow thesafety instructions when placing the TV.Connection and UsingAfter placing your TV properly, you can connect the TV with powersupply and cable components. For further information, see page 5to page 6.1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVIport of PC via HDMI-DVI cable.2. Connect the L-AUDIO-R jack on the side of TV to the audiooutput jack of computer with audio cable (dual-channel RCA jacksto 3.5mm stereo jack or the L-AUDIO-R jack).Note: 1. HDMI (High-Definition Multimedia Interface) is a compactaudio/video interface for transmitting uncompressed digital data. Itcarries the audio and video signal via the same cable and has thebest display quality.2. HDMI-DVI cable transfers only video signal from DVI port ofDVI device to HDMI jack of TV. For audio signal, please connectaudio output to L-AUDIO-R jack on TV back panel.HDMI ConnectionThe picture below is an example of a connection using the HDMIvideo jack.Turning On and OffConnect the AC cord to power the LED LCD TV. At this time theTV will enter standby mode and power indicator will turn red. UsePower button ( ) on the top panel of TV or on the remote controlto turn on the TV. After switching off the TV for 5 seconds, you canturn on TV again.Choosing TV ChannelOK button to confirm. For example, to watch analog channel “A51”,press “5”, “1”, “OK” on remote control in sequence.Note: Although there is no analog TV signal available in America,we reserve ATV functions for some expansible use.Tuning To Digital ChannelsA digital channel has a channel number beginning with “D”. Inputthe main digital number with numeric buttons directly, then press“-” button on remote control, and input the sub number at last.For example, to watch analog channel “D31-1”, press “3”, “1”, “-”,“1”, “OK” on remote control in sequence.Changing Channels Directly You can use CH button to increasechannel number and CH to decrease channel number.When no OSD (On Screen Display) is used, the up/down arrowscan also work as CH /CH buttons.Selecting Input SourcePress INPUT button on remotecontrol to display Source Select list.Use up/down arrows to highlight thesource you need and press OK toconfirm.About remote controlworking distance andangle, see the quickstart guideKeypad and Front PanelTV Jacks ExplanationSide Panel ConnectionsCable ConnectionsPreparation for Your New TVTV Signal ConnectionSafety PrecautionsBasic OperationsHow to Obtain Various Kinds of Input SourcesAfter connection is done, press INPUT button on remote controlor TV top panel to choose the input source you need. See page 7,Basic Operation of TV.Displays the Source Select List.Displays the TV Main Menu.Scans up through the channel list.In the TV menu system, it acts like the up arrow on theremote control and can be used to select menu options.Scans down through the channel list. In the TV menusystem, it acts like the down arrow on the remotecontrol and can be used to select menu options.Increases the volume. In the TV menu system, it actslike the right arrow on the remote control and can beused to select menu options.Decreases the volume. In the TV menu system, it actslike the left arrow on the remote control and can be usedto select menu options.Turns the TV on and off.Note: Do not plug the AC cord until you have accomplished all theconnections. This TV does not support QAM under cable channelsearch.To connect an ARC HDMI OUT device, please connect to the HDMIinput port of the device such as amplifier,Tuning To Analog Channelsan analog channel has a channel number beginning with “A”.Input the digital number with numeric buttons directly and pressHow to obtain various kinds of Input SourcesUSBDVDMove SelectOK08081113090812140908140910Picture MenuAdjust the OSD ScreenFrequently Asked Questions (FAQs)Audio MenuQuick MenuTroubleshootingTime MenuChannel MenuSetup MenuLock MenuWarranty CardWall Mounting Unit SpecificationUSB Media PlayProduct Specification13

/ 2

Related manuals for RCA LED32B30RQD