RCA LED50B45RQ User Manual

Also see for LED29B30RQ: User manual User manual User manual

Contents

The seven-band graphic equalizer allows you to adjust the audiofrequency settings. You can select one of the equalizer presets(Off, Pop, Rock, Jazz) or create your own personal preset (User).Press the left or right arrow to select the frequency (100Hz, 250Hz,500Hz, 1KHz, 2KHz, 4KHz, 10KHz) you want to adjust. Use theup or down arrow to adjust.Equalizer SettingsChannel MenuUse up/down to choose the function you need, press ENTER or rightarrow to adjust or enter a sub-menu. Thesub-menu image andexplanation are shown below.The Channel Menu enables you to search, view and edit channels. It isavailable in TV mode only. Press MENU and choose CHANNEL fromthe Main menu. Press the ENTER/down button to proceed toCHANNEL menu.Channel ListDisplays a channel list. It shows the current channels.Favorite ListDisplays a favorite channel list. It shows the currentfavorite channels.Channel: Press up/down arrow to switch the channel you want toedit.Skip: Set if the current channel is skipped.Favorite: Set if the current channel is the favorite channel.Label: Enter a channel label to rename the current channel.Channel SettingsGo to channel setting sub-menu.Signal TypeSelect your TV signal type: Air or Cable.Auto Channel SearchExecute an auto channel search (see page 7).• When the Parental Control Menu is accessed from the MainMenu, you need to enter password to unlock the menu function.Please enter your four-digit password with numeric keys 0~9.Note: The original password is “0000”.• After unlocking, the items in parental control menu can be used.Use arrow up/down to highlight the function you need and pressENTER or right arrow to use V-chip, Change Password, KeypadLock and Source Lock, Clear Channel List sub-menu.Lock Parental ControlV-ChipPress ENTER or right arrow to enter V-chip sub-menu, the detail asfollow:Parental MenuThe Setup Menu enables you to lock program with special content,panel key board and input source. Press MENU and choosePARENTAL from the Main menu. Press the ENTER/down button toproceed to PARENTAL menu.US V-ChipPress ENTER or right arrow to enter US V-Chip ratings menu,which contains two sub-menus: Movie Rating and TV rating. Seenext page for more details.Movie RatingUse arrow keys to select the rating level you want to block, pressENTER to lock/unlock the rating level. If you have blocked a lowerlevel rating, the higher ratings will be blocked too.For example, when PG-13 is blocked, R, NC-17 and X will beblocked at the same time.TV RatingSimilar with Movie Rating. After adjusting, press MENU to return orpress EXIT to exit the menu.TV Rating OverviewFor more rating explanation, see page 12.Age-Based RatingsTV-MA Mature Audience OnlyTV-14 Parents Strongly CautionedTV-PG Parents Guidance SuggestedTV-G General AudienceTV-Y7 Directed to Children 7Years and OlderTV-Y All ChildrenD Sexually Explicit DialogueL Adult LanguageS Sexual SituationsV ViolenceFV Fantasy ViolenceContent ThemesCanada V-ChipPress ENTER or right arrow to enter US V-Chip ratings menu,which contains two sub-menus: English Rating and French Rating.Note: These ratings are available only if the broadcaster is sendingrating information.French RatingPress ENTER or right arrow to enter French rating menu.Similar with English Rating.Use arrow keys to select the rating level you want to block, pressENTER to lock/unlock the rating level. If you have blocked a lowerlevel rating, the higher ratings will be blocked too.English RatingPress ENTER or right arrow to enter English rating menu.For example, when PG is blocked, 14+ and 18+ will be blocked atthe same time.9Picture SettingsPicture MenuOSD Menu OperationsAdjust the OSD ScreenThe OSD (On Screen Display) menu enables you to approach to the TVfunctions.To use OSD menu system, press MENU button on remote control,then use left/right arrow to highlight an option from PICTURE, SOUND,CHANNEL, PARENTAL, SETUP or OTHERS and press ENTER/downbutton.Press the up and down arrow to move to a different option within eachmenu. If necessary, press ENTER or right arrow to display the choicesof the option you’ve highlighted. If available, use the text at the bottomof each screen for help. To return to the previous menu, press theMENU button.To exit the OSD menu:• Press the EXIT button. The menu will clear from the screen.• Press the MENU button repeatedly until the menus disappear.Use up/down to choose the function you need, press ENTER or rightarrow to adjust or enter a sub-menu. The sub-menu image andexplanation are shown below.If available, use the text at the bottom of each screen for help.The Picture Menu contains menus and controls to configure the waythe picture appears. The Picture Menu options apply to the video forthe main TV and VIDEO INPUT selections. All picture options can beapplied to each input.Press MENU on the remote. Select Picture from the Main menu. Pressthe ENTER/down button to proceed to PICTURE menu.Picture Mode: Choose the preset visual mode of your TV:Standard, Movie, User, Dynamic, Power Saving. (Only in Usermode you can adjust Brightness, Contrast, Color, Tint andSharpness. Changes to Power Saving mode can decrease thepower consumption.Color TemperatureThis option allows you to select one of three automatic coloradjustments: Cool for a bluer palette of picture colors; Normal orWarm for a redder palette of color.Advanced Picture Settings (not available in PC mode)• Dynamic Contrast: Set dynamic contrast Off/low/Medium/High.• Film Mode: Set film mode on/off.• Noise Reduction: Set noise reduction as Off/low/Medium/High.• MPEG Noise Reduction: Set MPEG noise reduction as Off/low/Mediumor High.Note: Noise reduction helps to reduce the picture “static” orany type of interference. This feature is especially useful forproviding a clearer picture in weak analog signal conditions.The MPEG Noise Reduction specifically works on video signalwith MPEG coding.Screen SizeScreen Size: Select a screen aspect ratio. (Available ratio: Wide,Cinema, Zoom, and Normal.) Please choose the ratio that appliesto your video signal format best.Surround ModeCreates a 3D sound surround from standard stereo material, withdeep and rich enhancement.Auto VolumeSet auto volume control on/off.Analog SoundSelect analog TV audio sound type: Stereo, Mono or SAP (onlyavailable in TV mode).Digital SoundSelect digital TV audio language type: English, French or Spanish(only available for DTV channel).Digital Audio OutputSet the audio output type as Off, PCM or Raw. Please set thisoption according to your power amplifier.• Sound Mode: Choose the preset sound mode of your TV:Standard, Soft, User, Dynamic. Only in User mode you canadjust Bass, Treble, Balance.• Bass: Adjust the bass component of TV sound.• Treble: Adjust the treble component of TV sound.• Balance: Adjust the balance between the left and right channel.Sound SettingsSound MenuUse up/down to choose the function you need, press ENTER or rightarrow to adjust or enter a sub-menu. Thesub-menu image andexplanation are shown below.The Sound Menu lets you adjust audio output. To access the SoundMenu, press MENU on the remote, and then select SOUND from theMain Menu. Press ENTER/down button to proceed to SOUND menu.8EPG (Electronic Program Guide)Press EPG button on the remote control, the electronic program guidewill appear in the center of screen. The electronic program guide givesthe TV program playing project. You can use left/right arrows to switchpages.• Brightness: Adjust the brightness of picture.• Contrast: Adjust the contrast of color.• Color: Adjust the richness of color.• Tint: Adjust the balance between red and green level (onlyavailable in NTSC signal).• Sharpness: Adjust the sharpness level of picture.Block Unrated ShowBlock all the unrated program.Downloadable Rating, Clear Downloadable DataActivate or downloadable rating data. if available.RemoteSelect your Remote: Off, Remote1 or Remote2. This is for specialpurpose.Keypad LockSelect this option to block or unblock the TV’s side panel buttonsso that they can’t be used.Change PasswordChange the password of parental menu.Old PIN: Input the old password.New PIN: Input the new password.Confirm: Input the new password again to confirm.Clear Channel ListThis option allows you to execute Clear Channel List function. Thisfunction will reset the whole TV system to factory default (not onlyreset OSD menu).Source LockThis option allows you to lock or unlock the input source. Thesource blocked can not be chosen from input list unless you inputthe correct parental password.Use up/down arrow to select the source, press ENTER to lock orunlock it.Setup Menu10The Setup Menu lets you config the TV with your preferences. SelectSETUP from the Main Menu. Press ENTER/down button to proceed toSETUP menu.Use up/down to choose the function you need, press ENTER orright arrow to adjust or enter a sub-menu. The sub-menu imageand explanation are shown below.Closed CaptionCaption DisplayPress left/right arrow to select caption display on or off.Analog Caption TypePress left/right arrow to select analog closed caption type: CC1,CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4.Digital Caption TypePress left/right arrow to select digital closed caption type: Service1,Service2, Service3, Service4, Service5, Service6.Digital CC PresetPress left/right arrow to select digital closed caption preset: Default,Custom. Only in custom mode you can adjust the digital closedcaption style.Menu LanguageTo choose your menu language, press the left/right arrow until thelanguage you need appears.Available languages: English, French and Spanish.Menu TransparencyTo choose your menu transparency mode, press the left/rightarrow until the transparency you need appears: Off, Low, Medium,High.Video StyleIf you connect the HDMI/DVI port of PC to HDMI jack of the TVand the video signal is 1080p, please choose the compatible videostyle: Video, Graphic.Digital CC StylePress left/right arrow to go to digital closed caption style sub-menu,to select the closed caption style.Select the item you want to adjust in Digital CC Style menu withup/down arrows.After changing, you can preview the caption style in the bottom.Initial Setup WizardTo set the initial settings. (see page 7)ClockTime ZoneSelect your time zone: Eastern, Central, Mountain, Pacific, Alaska,Hawaii, Samoa, Newfoundland, Atlantic.Auto ClockSelect auto clock on/off. Auto clock helps you synchronize your TVtime to standard time (from DTV signal).Setup TimeSet your TV time manually (needs to turn off auto clock).Day of WeekDisplays what day it is (can’t be adjusted, displays only).Daylight Saving TimeSet your daylight saving time on or off (needs to turn on auto clock).Others MenuThe Others Menu lets you config the TV with your preferences in otherfeatures. Choose OTHERS from the Main Menu. Press ENTER/downbutton to proceed to SETUP menu.11Use up/down to choose the function you need, press ENTER or rightarrow to adjust or enter a sub-menu. The sub-menu image andexplanation are shown below.Blue BackPress ENTER button to select Blue Back on or off. If the Blue Backis turned on, the TV will display a blue background when there isno signal input.No Signal Power OffPress ENTER button to select “No Signal Power Off” on or off. If itis turned on, the TV will shut off after 10-minute no signal time. Wesuggest you turn on this function when Blue Back is turned on. Itmay hurt the LED LCD panel if blue screen is on for too long.Note: In PC mode, the monitor standby and power off settingsdepend on the No Signal Off time.No Operation Power OffPress ENTER button to select “No Operation Power Off” on or off.If it is turned on, the TV will shut off after a 3-hour no operationtime.All ResetPress ENTER button to execute reset to TV system. All the settingswill be reset to factory default.Note: The OSD’s appearance and color are referred to the actualappliance.Audio OnlyPress ENTER button to activate audio only mode. The TV willoutput only sound and the panel will be turned off. To restorenormal playing, hold POWER button for three seconds.What’s the most convenient way to view HighDefinition (HD) video?Connect an antenna to the TV Input jack to view free local digitalchannels. You may need to purchase an antenna. (See page 4 formore information about antenna setup).Visit www.antennaweb.org for assistance in deciding what type ofantenna to use to receive the local digital channels available to you.After entering your location, this mapping program tells you which localanalog and digital stations are available using a certain antenna.Are there other ways to view High Definition(HD) video?Besides using an antenna as mentioned above, you can also use aset-top box to receive digital video. Contact your cable service provideror satellite provider to purchase digital programming and have themconnect the box to ensure you are viewing channels in the best way.How do I tell an analog channel from a digitalchannel?Press the DISPLAY button to display the Channel Bar. Look at the topright corner of the screen. An “A” is displayed for an analog channel.A “D” is displayed for a digital channel.Note: Since the analog TV in America has been cut off, we reserveanalog TV function only for some unexpected use.Why are there bars on my screen, and can I getrid of them?Most digital video is sent in a 16/9 format which fills your screen, but issometimes sent in 4/3 which does not fill your screen. It depends onhow the station or device connected to your TV is formatting the video.If there are bars on the screen,press the ASPECT button to try a different format that may eliminatethe bars. Some bars can't be removed because of the way the formatis sent by the broadcaster. The format changes as you press theASPECT button and the format type is displayed at the bottom of thescreen. For more information on screen size, go to page 8.Why does channel search find a lot of channels,but when I try to tune to them, there’s nothingthere?Frequently Asked Questions (FAQs)Identifying ProblemsIf there are any problems when using the product, please consult thelist below. If the list does not solve the problem, call our CustomerService Center immediately.TV ProblemsThere is no picture or sound but the TV is on and thereis a “No Signal” sign on screen.• Are you trying to use an input source with no device connected toit? For using other video/audio device, make sure the externaldevice works normally first, then press INPUT and choose the rightinput source.• The Signal Type option may be set incorrectly. Go to page 9 fordetailed instructions.• The channel may be blank. Try to search the channel again orchange another channel.The sound is fine, but the picture is poor.• If you can only get black and white pictures from external devicethat you've connected to your TV, maybe it is due to the videocables is not connected well, or they are connected wrongly.Check the connection stability first, then check the correctness. ForAV input, the yellow video cable connects to the yellow Video Injack on the side of your TV. For Component input, the three Y, Pb,Pr video cables (red, blue, and green) should be connect to thecorresponding input jacks on the side of your TV.• Check the antenna connections. Make sure all of the cables arefirmly connected to the TV jack on side of your TV.• Try adjusting the color features to improve.TroubleshootingSome channels don’t carry programming, such as video On Demand.When channels are unavailable, your TV screen is blank or appears likesnow. You probably want to remove these channels from your channellist. Remove these in the Channel List Menu. Go to page 9 for moreinformation.Why does it take a long time when I search thechannels at first time?If you have both analog and digital channels, the TV is looking for allavailable channels in the channel list. If you do have digital channels,the TV is also searching for scrambled channels, non-scrambledchannels, and each sub-channel of that digital channel.The TV can’t be turned on.• Make sure the AC cord is plugged in.• Check the wall outlet, make sure the AC output works normally andstably.• The side panel may be locked (disabled). Use the remote control toturn on the TV.• Select the Keypad Lock function in the PARENTAL Menu and pressENTER to uncheck the locking status.There is no sound, but the picture is fine.• The sound might be muted. Try pressing the MUTE button torestore sound.• For using AV or Component, remember to connect the device’s leftD50 - 1 KOCE-HDSmart Travels - Pacific Rim with Rudy Maxa23 : 00 - 23 : 30Stockholm & Sweden is a natural-born beauty, winning us over withluxuriant landscapes and sleek Scandinavian style. We cruise throughStockholm’s sun-dappled archipelago, visit a designer hotel and sip cocktailsin the trendy Ice Bar (a lounge...:Page:ReturnMENUPage 1/2PICTURE SOUND CHANNEL PARENTAL SETUP OTHERSPICTUREAdjust settings to affect picture quality.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTUREScreen SizePicture SettingsColor TemperatureAdvanced Picture SettingsWarmWideSOUNDAdjust settings to affect sound quality.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTURESurround ModeAnalog Sound StereoAuto VolumeEnglishPCMDigital SoundDigital Audio OutputEqualizer SettingsSound SettingsCHANNELAdjust channel options.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTUREFavorite ListChannel SettingsSignal TypeAuto Channel SearchChannel ListAirExecutePARENTAL CONTROLSet TV parental controls.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTUREV-ChipChange PasswordKeypad LockSource LockClear Channel ListLock Parental ControlRemoteV-CHIPRestrict movie and TV programs by US Ratings.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTURECanada V-ChipBlock Unrated ShowDownloadable RatingClear Downloadable DataUS V-ChipMenu LanguageSETUPSet various TV options.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTUREMenu TransparencyInitial Setup WizardVideo styleEnglishOffVideoClockClosed CaptionExecuteCLOSED CAPTIONAdjust Closed Captioning settings.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTUREAnalog Caption Type CC1Service1Digital Caption TypeDefaultDigital CC PresetDigital CC StyleCaption Display OffCLOCKSelect your Time Zone.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTUREAuto Clock1980-01-06 18:49:24Setup TimeSunDay of WeekTime Zone EasternDaylight Saving TimeOTHERSAdjust settings to set other controls.MOVE SELECT : ExitSOUND CHANNEL PARENTAL OTHERSSETUPPICTURENo Signal Power OffNo Operation Power OffAll ResetAudio OnlyBlue BackExecuteExecute

/ 4

Related manuals for RCA LED29B30RQ