13CHAPTER THREE : TV O PERATIONTV O PERATIONMemorizing channels, continued3 Press CH or CH to select a channel. Press VOL+ to add thechannel or –VOL to erase the channel. You can also use the number buttons to enter the channel number.4 When you are finished, press the MENU button twice to return tonormal viewing. You can still view a channel that is not stored in memory. To do so, use thenumber buttons on the remote control to select the channel.Fine tuning channelsYou can fine tune a channel to make it come in clearer.1 Press CH , CH , or the number buttons to select a channel.2 Press MENU repeatedly until you see the Setup menu. Press CH until you select “Fine tune.”3 Press –VOL and VOL+ until the channel becomes as clear aspossible. When the “slide box” displays a single vertical line, this indicates the“average” fine tuning setting.4 Press DISPLAY or MENU to clear the menus from the screen.Fine tuneChannelsCaptionLanguageMemorizeAdd/EraseFine tuneVideoTimeSetupAdd/EraseANT 12 Erased AddedPress "Menu" to finish.1234341547278C 11/14/01 2:32 PM Page 17