RCA P46920BL User Manual

Also see for P46920BL: Brochure & specs

Contents

RCA P46920BL User Manual Manual pdf 4 page image

4Setup and ConnectionsStep 1: Unpack the TVMake sure to locate the remote control and your GUIDE Plus+ Booklet.Step 2: Connecting your TVThere are three types of connections outlined in this section:TV Only: If you’re only going to connect theTV to your home antenna or cablesystem.The Basic Connection: If you’re going to connect the TV to aVCR or satellite receiver.Advanced Connections: If you’re going to make multipleconnections, hooking up the TV toone or two VCRs, DVD player, and asatellite receiver.Cable information and illustrations are given for each type of connection.Once you have completed your desired connection you may skip forwardto Step 3.TV Only (PIP Not Available)This is a basic connection from an antenna or cable system to your TV.Connect the cable into the Cable/Antenna jack as shown.CablesYou will use the following cable to make your connection:Coaxial Cable: These cables carry audio and videosignal to the TV from an antenna, cable, orcablebox.INPUT 1VIDEORS-VIDEORINPUT 2VIDEOCABLE/ANTENNAINPUTS-VIDEOL—AUDIO—RVCRCONTROLAUDIO OUTPUTAUDIOLLAUDIO+ RIGHT - + LEFT -SPEAKERSELECTIONEXTERNAL INTERNALSPEAKERSCABLE, CABLE BOX, OR ANTENNAOnce you have completed this connection you may skip to Step 3.Before You ConnectProtect against power surges:• Connect all components beforeplugging any power cords into the walloutlet.• Turn off the TV and/or componentbefore connecting or disconnecting anycables.• Make sure all antennas and cables areproperly grounded. Refer to yourSafety Tips sheet packed with your TV.This Connection Will Not AllowYou to Use Your PIPYour TV is equipped with a single tunerwhich means you must connect with asecond video source using Audio/VideoCables. This TV Only connection will notenable you to use your PIP, but will getyour TV up and running quickly.Refer to Advanced Connections forconnecting Audio/Video cables to yourVCR or other video component.