RCA P52921YX3-G User Manual

Select Yes if the cable box changed to channel 9, or No if it did not. If you select No, the system will try another code.If the GUIDE Plus+ Gold System cannot recognize either your cable box or VCR after several tries, a screen stating "CableBox (VCR) test failed...Please consult your manual and try again" appears. You have a choice to either Try Again or SkipCable Box Setup. If you get this message, you should also:• Double check the brand of your cable box or VCR, and try entering it again.• Check to make sure the G-LINK wands are positioned correctly. See the Setup and Connections section of this manualfor more detailsIf you choose to skip the cable box (or VCR) setup some features of the guide may not be avaiIable until you successfullycomplete this procedure.Once the correct model of cable box hasbeen identified, you need to set the cablebox's output channel. Enter the channelyou use to view channels through yourcable box--usually 3 or 4. Consult yourcable box's instruction book or your cablecompany if you are not sure. Choose 0 touse VIDEO INPUT.Select YES if you have a VCR, or NO if not.(Answering NO automatically skips forwardto the end of GUIDE Plus+ Gold setup.)Tune your VCR to channel 2 and turn it off.Enter the brand of your VCR.When the GUIDE Plus+ Gold System correctlyidentifies the correct code for your VCR, theVCR's tuner changes to channel 9.Select YES if the VCR automatically changedto channel 9, or NO if it did not.If you select NO, the system will tryanother code.The last screen that comes up after you've successfully finished the GUIDEPlus+ Gold setup gives you an opportunity to view a demo. If you don'twant to view the demo, highlight EXIT and press OK.R_llt)@ll_h@r:• Leave your cable box turned ON to download program information.• Leave your VCR turned OFF to record programs and download programinformation.15