RCA P52936 User Manual
                                                                | |
Contents
| 
Setup and Connections5Basic PIP ConnectionCablesYou will use the following cable to make your connection:Coaxial Cables: Carries the signal from theantenna or cable directly to the television orthrough a cable box, as needed by your cablesystem.Audio/Video Cables: Carries sound and videofrom the component to the TV.S-Video Cable: Carries video from an S-Videocapable component which provides bestpicture quality.TV and Stereo VCRVCRTVVIDEOOUTIN FROM ANTOUT TO TVCH3CH4R AUDIO LINR L G-LINKP R P B YCABLE, CABLE BOX, OR ANTENNAOnce you have completed this connection go to “Step 3:Connect the G-LINK Cable” on page 9.How to View Your VCRTo watch the VCR in this connection, press TV to put theremote control into TV mode, then press WHO•INPUT toscroll through the video input channels until you tune toVID1 input.In the Interactive Setup section you can program the TV toautomatically tune to the VID1 input channel when youturn on the VCR.Most Audio/Video cables are combinedinto one cable with three heads oneach end.We show individual cablesin these sampleconnections. Eithermay be used, butyou must be sure toconnect Video toVideo, Right to Rightand Left to Left.Video (yellow)Right Audio (red)Left Audio (white) |
Related manuals for RCA GUIDE PLUS+ Gold
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine