RCA R52WH73 User Manual

Also see for R52WH73: User guide User guide Guide de l'utilisateur

Contents

RCA R52WH73 User Manual Manual pdf 27 page image

Chapter Using the Remote Control3. Press and release the device button (SAT•CABLE, AUX or DVD) you want to program.4. Repeatedly press and release the ON•OFF button, watching for the device to respond. If it doesturn off, press and release the OK button within 3 seconds to save the code. If you accidentallypassed the code before saving it, press the left arrow button to backtrack through the codes; thenuse the right arrow button to go forward through the codes again.When all codes have been searched, the device button flashes 3 times, then the remote exits manualcode search and returns to normal operation.Using Automatic Code Search1. Turn on the device you want to control.2. On your remote control, simultaneously press and hold ON•OFF and MUTE (approximately 3seconds) until a device button remains lit. Then release the buttons.3. Press and release the device button you want to program.4. Press and release the ON•OFF button once. There is a delay of approximately 6 seconds beforethe remote starts the code search.The device buttons blinks each time the remote control sends a code to test for your device.Keep pointing the remote at the device.5. Once the device turns off, quickly press the OK button to save the code.6. If you accidentally passed the code before saving it, press the left arrow button to backtrackthrough the codes; then use the right arrow button to go forward through the codes again.When all codes have been searched, the device button flashes 3 times, then the remote exitsautomatic code search and returns to normal operation.How to Use the remote After You’veProgrammed ItOnce the remote has been programmed successfully, you are ready to use it to operate your devices.To Operate the Device:1. Press the appropriate device button (SAT•CABLE, AUX, DVD) to set the remote to control thedevice.2. Press ON•OFF to turn the device ON or OFF.3. Use the remote buttons that apply to that device.notes: The remote control may not be compatible with all brands and models of devices.Some of the remote buttons might operate differently for other devices, especially when you’reusing another device’s menu system.Modes of OperationBecause this universal remote can control several different devices (DVD player, VCR, cable box,etc.) it uses operational modes triggered by the device buttons. For example, if you want the remotecontrol to operate the TV, press the TV button to put the remote into TV mode. If you want theremote to operate the DVD player, press the DVD button.The button corresponding to the mode the remote is in lights up when you press any button thatworks in that mode. For example, if you’re in TV mode and you press the VOL+ button, the TVbutton lights up. This tells you that the command to increase the volume is being sent to the TV (andnot the satellite receiver, for example).