RCA RCR412BR Owner's Manual

Also see for RCR412BR: Owner's manual

Contents

Testing the Code for Maximum Functionality1. Try a variety of the device’s functions with the remote. Ifsome device features don’t work, go to the next step to trya different code.2. Repeat the Brand Code Search from the beginning. Whenthe device turns off for the first time, don’t press the STOPkey, which would store the same code. Instead, with theunit now off, continue to press the ON•OFF key repeatedlyuntil the unit turns back on.3. Once the unit turns back on, you have found another codethat operates the device. Press the STOP key.4. Test the key’s functionality again by attempting to controla variety of the device’s functions. If the code that hasbeen stored controls the majority of the device’s functions,programming is complete. If the code stored does not givemaximum functionality, try another code.NOTESThroughout the programming of each key, be sure to keepthe remote pointed at the IR sensor of the device you arecurrently programming the remote to control.Test the remote with the device to make sure the devicekey is programmed with the correct code for maximumfunctionality. If some features don’t work, try a differentcode. See the “Testing the Code for Maximum Functionality”section below for more information.During the Brand Code Search, the remote ignoreskeypresses that aren’t part of the search.The search times out after two minutes (the ON•OFF keyblinks four times and turns off, and the last programmedcode under that device key is retained).The ON•OFF key blinks four times and turns off when theremote has gone through all the codes. The remote exits theBrand Code Search. If your device hasn’t turned off yet, try adifferent search method.Direct Code EntryDirect Code Entry lets you enter a code from the accompanyingcode list for your brand of device. It’s not as easy as the othermethods, but it’s potentially the fastest method.1. Manually turn on the device youwant to control.3. Press and hold the device key you want to program (theON•OFF key comes on).While you’re holding down the device key, use your otherhand enter the first five-digit code for your brand in thecode list (the ON•OFF key goes off after the first digit).2. Find the Code List that came withthe remote. Locate the section forthe type of device you’re trying toprogram, and find your brand inthat section. Circle the codes foryour brand and keep them handy.Code ListsLista de Códigos0 1 2 3 4 5 6 7 8 9VVCR0 1 2 3 4 5 6 7 8 9D DS C BLE0 1 2 3 4 5 6 7 8 90 1 2 3 4 5 6 7 8 9NOTESRemember to enter the code for future reference in the boxprovided in the Code Retrieval section of this manual.If your brand isn’t listed in the code list, use one of the CodeSearch methods to program the remote control. (Refer to theAuto and Manual Code Search methods.)If you release the device key any time during the Direct CodeEntry procedure, the ON•OFF key blinks four times, andthe process is exited. The last programmed code under thedevice key is retained.Test the remote with the device to make sure the devicekey is programmed with the correct code for maximumfunctionality. If some features don’t work, try a different codein the list.4. When you’ve finished entering the five-digit code, keepholding down the device key and look at the ON•OFF key.Is the ON•OFF key on?YES: You’re done! You’ve programmed this device key.NO, it blinked four times and turned off: You haveeither entered a code number that is not in the code lists ormissed a step in the code entry procedure. Try step 3 again.Manual Code SearchThe Manual Code Search lets you go one-by-one through allthe codes for the device you’re trying to control. When you findthe one that operates your device, you can stop the search andstore that code.TIPS: The ON•OFF key serves as an indicator light duringprogramming, giving you feedback at each stage of the process.Each device key is associated with a type of device—the TV ispreset to search for TVs, SAT•CBL•DTC for satellite receivers,cable boxes or digital TV converters, DVD for DVD players,and VCR•AUX for VCRs or DVRs. To program a device key fora different type of device, see the Changing a Key’s DeviceType section.The Manual Code Search method may take a long timebecause the remote searches through all of the codes inits memory one-by-one. If your brand is listed in the BrandCodes or the Code Lists, first try the Brand Code Search orthe Direct Code Entry method.To exit without saving a new code at any point in the ManualCode Search, press the GO BACK key.TIP: Each device key is associated with a type of device—theTV is preset to search for TVs, SAT•CBL•DTC for satellitereceivers, cable boxes or digital TV converters, DVD for DVDplayers, and VCR•AUX for VCRs and DVRs. To program adevice key for a different type of device, see the Changing aKey’s Device Type section.The ON•OFF key serves as an indicator light duringprogramming, giving you feedback at each stage of theprocess.

/ 6

Related manuals for RCA RCR412BR