RCA RCR4258 Owner's Manual

Contents

Four-ComponentUniversal RemoteCongratulations on your purchase of this four-componentuniversal remote. This universal remote controls up to fourelectronic components and makes juggling remote controls athing of the past. Your remote is guaranteed to work with allbrands of components. And, not only is your remote easy toprogram, it’s easy to operate, too. We’ve specially designed thisremote with big buttons to give you total control…at the touchof your fingertips.SAVE THIS MANUAL AND THE CODE LISTS!Remote controls can sometimes lose their programming when youchange the batteries. Make sure you keep the manual and code lists ina safe place so that you can reprogram the remote if you need to.Tip: The four-component universal remote is already programmedto operate most RCA, GE and PROSCAN branded TVs, VCRs,DVD players and satellite receivers. Just press the correspondingkey—DVD•VCR for a DVD player, TV for a television, SAT•CBLfor a satellite receiver, DVR•AUX for a DVR.Componentkeys (TV,SAT•CBL,DVD•VCR,DVR•AUX)DedicatedMENU andGUIDEkeys letyou accessadvancedcomponentfunctionsTransportkeys forDVD/DVRcontrolCH andVOL keyshave dualfunctions:they canact asnavigationkeys inmenusystemsas well aschanneland volumecontrollersoutside themenusINFO keydisplaysinformationfor thecomponentyou’recontrollingBattery Installation and InformationYour universal remote requires two AAA alkaline batteries(batteries may or may not be included, depending on model).To install the batteries:1. Press and push the batterycompartment cover to remove it.2. Insert the batteries, matching thebatteries to the (+) and (–) marksinside the battery compartment.3. Push the battery cover back into place.Note: If you are replacing batteries, try not to press any buttons afteryou’ve taken the old batteries out. Pressing buttons while replacingbatteries causes the remote to lose the devices you’ve programmed. Youwill need to program the remote again.Battery Precautions:• Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.• Always remove old, weak or worn-out batteries promptly and recycle ordispose of them in accordance with Local and National Regulations.Battery SaverYour universal remote control saves battery power byautomatically turning off if any key is pressed for more than60 seconds. This saves your battery life should your remoteget stuck in a place where the keys remain depressed, such asbetween sofa cushions.The INPUT and — (dash) key has three functions:() it toggles through all the video sourcesconnected to your TV; (2) when the remote is inVCR mode, this button toggles between VCR andthe TV input; (3) when you’re entering digitalchannel numbers directly, this button lets youseparate the main channel number from thesubchannel numberRCR4258 / RCR4358Universal Remote ControlOwner’s ManualManual del Propietario (parte posterior)Programming Your RemoteYour universal remote can operate a variety of brands ofcomponents. In order for your universal remote to control yourcomponents, you need to program the remote with the codesthat match the components (See Code Lists enclosed or go torca.com/codefinder). These codes enable the remote tocommunicate with your components. Each brand and eachcomponent has its own “language,” and, by programming thecorrect codes into your remote, you tell the remote to “speak thesame language” as your components.Actualmodel mayvary frompictureshownCare and Maintenance• Keep the remote dry. If it gets wet, wipe it dry immediately.• Use and store the remote only in normal temperatureenvironments.• Handle the remote gently and carefully. Don’t drop it.• Keep the remote away from dust and dirt.• Wipe the remote with a damp cloth occasionally to keep itlooking new.• Modifying or tampering with the remote’s internal componentscan cause malfunction and invalidate its warranty.