RCA RCU 300 - SystemLink3 Universal Remote User Manual

Also see for RCU300 - RCU 300 Universal Remote Control: Catalog Product manual User guide Code List

Contents

RCA RCU 300 - SystemLink3 Universal Remote User Manual Manual pdf 5 page image

5(OFF)1 2 34 5 67 8 90ON•OFFTV CODEProgram for TV—Direct Entry Method1. Manually turn on the TV.2. Locate the enclosed TV Code List.Find your brand of TV.Note: If your brand isn’t listed,use one of the Code Search methodsto program this remote control(See Code Search on page 8).3. Press and hold the CODE SEARCHkey until the indicator lightilluminates. Then release theCODE SEARCH key.4. Press and release the TV key. Theindicator light blinks and then remains lit.5. Use the number keys to enterthe first code listed for your brand.After you enter a valid three-digitcode, the indicator light turns off.Note: If you enter an invalid code,the LED will flash rapidly for 2seconds. Start over at step 3.6. Aim the remote at your TV and pressthe ON•OFF key. If your TV turnsoff, you have found the correct code.7. Enter the code in the box providedon this page for future reference.8. If your TV doesn’t turn off, repeatsteps 3-6 above, entering the nextcode for your brand.If none of the codes work or yourbrand is not listed, use one of theCode Search methods to program thisremote (See Code Search on page 8).For a description of each key on theremote control, refer to the KeyDescriptions section on page 3-4.In order for the 3 component universal remote to controlyour TV, you must program it with the TV code that matchesyour TV. These instructions explain the preferred method ofprogramming the remote—the Direct Entry method.CODESEARCHINDICATORLIGHT(BLINK)TVRCU300_US_IB_REVC 7/16/03 15:17 Page 5