RCA RCU1010RF Quick Start Manual

Also see for RCU1010: User guide

RCA RCU1010RF Quick Start Manual Manual pdf 1 page image

Congratulations on your purchase of the RCU1010 Universal Learning Remote with Touchscreen. YourRCU1010 controls up to nine components, including the most popular brands of TV, VCR, DVD, PVR,SAT/CBL, CD and AUDIO equipment. This unit has the ability to learn commands from your existingremotes, and the Smart Macro feature allows multiple commands to be executed in sequence with asingle keypress. The RCU1010 is easy to use, easy to program and gives you total control—at the touchof your fingertips!Getting StartedUniversal Learning Remote withTOUCHSCREENQuick Start GuideBefore You BeginThis handy Quick Start Guide provides step-by-step instructions regarding some of the most popularfeatures of this remote control. Use it as a supplement to the User’s Guide, to which you may referfor further details.The RCU1010 LCD touchscreen remains blank when the remote is not in use. The touchscreen turnson automatically when you press and release the SETUP key, the BACKLIGHT key, or any LCDtouchscreen key. The remaining rubber keys do not activate the LCD touchscreen.For the purposes of this guide, “component” refers to your electronic equipment—TV, VCR, DVD,satellite receiver, auxiliary or audio components—all of which can be operated using the RCU1010 remotecontrol unit. When you press and release a component key, you put the remote in that component mode(e.g., pressing the TV key puts the remote in the TV Mode). The remote remains in that mode until youpress and release another mode key. When you put the remote in a specific component mode, the controlscreen that is shown on the touchscreen is the control screen for that mode.Install the BatteriesYour RCU1010 Universal Learning Remote with Touchscreen requires four AAA alkaline batteries(sold separately).SETUP key BACKLIGHT keyTouchscreen keys1. Push on the tab on the back of the remote and slide thecover down.2. Insert the batteries, matching the batteries to the (+) and(-) marks inside the battery case.3. Slide the battery cover back into place.RCU1010RCU1010_US_QS_revA 3/19/03 16:41 Page 1