Operating A VCRTum the VCR On and Off.1 . Press VCR to set the remote to control theVCR. (Most RCA, GE and ProScan modelswill only turn on when pressing VCR notOFF/ON).2. Press OFF/ON to tum the VCR on or off.Watch a tape in your VCR.1 . Turn on the VCR.2. Insert a tape in the VCR.3. Press PLAY to start the tape.4. Press STOP when you are finished.5. Press REW to rewind the tape.6. Press PAUSE to pause the tape.Record one channel and watch another.1 . Press VCR to set the remote to controlthe VCR. If you programmed AUXfor a VCR, press AUX.2. Tune the VCR to the channelyou want to record.3. Press REC to start recording.4. Press TVNCR.5. Press TV to set the remote to control the TV.6. Press CHANNEL UP or DOWN tochange channels on the TV.7. To see the channel you are recording,tune the TV to channel 3 or 4(same as CH3 / 4 switch on the VCR).AUX CABLE VCR TV001 0OFF/ON•PLAY~STOP•REW•PAUSE•0010\0\0 3040 50 6070 80 90EiROoREC(I)TY/VeReCHAN•CHANT7