RCA RCU510 User Manual

Contents

RCA RCU510 User Manual Manual pdf 13 page image

Note: Not all functions work for all brands. See page 12 for theAudio code list to operate your brand of equipment.TURNING ON THE RECEIVER OR MINI-SYSTEMPoint the remote control at the receiver and press theAUDIO button. The receiver should turn on. In some cases,it may require pressing the AUDIO button and then thePOWER button to turn the system on.SELECTING A DEVICE INPUTDevice inputs such as CD Player or Tape Deck may beselected depending on the features of your receiver ormini-system. Input selection may be made either by press-ing the labeled digit button, or by pressing the FUNCTIONbutton to cycle through the inputs available on your sys-tem.Note: You may need to experiment with your system sincemanufacturers products do not all work the same way.USING THE NUMBER BUTTONS TO CHANGEAUDIO INPUTSTo select a device, press the number button (1-6) that corre-sponds with the device you want to operate (CD, TAPE,TUNER, TV, VIDEO 1, & VIDEO 2).USING THE FUNCTION BUTTON TO CHANGEAUDIO DEVICESTo select a device, press the FUNCTION button until theinput you want to operate appears on your system.OPERATING A CD PLAYER OR TAPE DECKUse the Play, Forward, Reverse, Record, Stop, and Pausebuttons for CD players and tape decks. In some cases, thePreset buttons (CH+/CH-) may work in changing trackson CD players.OPERATING THE AM/FM TUNER1. Press the AUDIO button2. Press the TUNER (3) button3. Press the AM/FM button to toggle between AM and FM4. Use the Preset (CH+/CH-) buttons to move up anddown through the channel presets.Operating Audio FunctionspowercodesearchCABLEDVDsleep clearguideselectch +ch -vol - vol +infomutemenu tv •vcrgobackenter AUDIOTV VCR2 3180975 64DBSSATam•fmcd tape tunertvfunctionrew play fwdrec stop pausevideo1 video212RCU510manual 7/19/01 10:27 AM Page 13