RCA RCU600WMS User Manual

Also see for RCU600: User manual

Contents

RCA RCU600WMS User Manual Manual pdf 9 page image

6. Aim the remote at the AUDIO component. Press the ON•OFFkey. If your AUDIO component turns off, you have found thecorrect code. If your AUDIO component does not turn off,repeat steps 3-6 above, entering the next code for your brand.7. With your AUDIO component on, press the VOL+(VOLUME UP) key. If the AUDIO component responds,no further programming is required.8. Enter the code in the box provided on this page forfuture reference.9. If none of the codes work or your brand is not listed,use one of the Code Search methods to program this remote.(See Code Search section on page 10).The following is a list of instructions for operating Audio functions. Not all functions work for allbrands. Experiment with your AUDIO system to determine which functions work with yourcomponents. See the enclosed AUDIO Code List to operate your brand of equipment.TURNING ON THE RECEIVEROR MINI-SYSTEMPoint the remote control at the receiver and pressthe AUDIO key and then the ON•OFF key to turnthe system on.SELECTING A COMPONENT INPUTComponent inputs such as a DVD player or VCRmay be selected depending on the features of yourreceiver or mini-system. Input selection may bemade either by pressing the labeled number keyor pressing the FUNCTION key to toggle throughthe inputs available on your system.Note: You may need to experiment with yoursystem since manufacturers’ products do notall work in the same manner.USING THE NUMBER KEYS TOCHANGE AUDIO INPUTSTo select a component, press the number key(1-6) that corresponds with the componentyou want to operate (CD, TAPE, TUNER, TV,VIDEO 1, or VIDEO 2).USING THE FUNCTION KEY TOCHANGE AUDIO INPUTSTo select a component, press the FUNCTION keyuntil the input you want to operate appears onyour system.OPERATING THE AM·FM TUNER1. Press the AUDIO key and then the ON•OFFkey to turn the system on.2. Press the TUNER (3) key.3. Press the AM·FM key to toggle between AMand FM.4. Use the Preset (CH+/CH-) keys to move upand down channel presets.OPERATING A HOME THEATERSURROUND SOUND SYSTEM1. Turn the TV on.2. Press the AUDIO key and then the ON•OFFkey to turn the system on.3. Select the AUDIO input either by using thelabeled number keys or the FUNCTION key.4. Press the VOL+ or VOL- keys to controlvolume.Note: The VOLUME keys may operate bothTV and receiver volume at the same time.If this presents a problem, it may be resolvedby entering the TV menu and disabling theTV speakers.CONTROLLING THESURROUND SOUND FEATUREPress the DELAY+ or DELAY- key to achievethe desired delay effect.Press the DSP ON•OFF key to turn DSP(Digital Signal Processing) on or off.Press the DSP MODE key until the desiredeffect is achieved.Press the TEST key to listen to speaker levels.Press FRONT, CENTER, or REAR keys toselect speakers.Press the LEVEL+ or LEVEL- keys to adjustthe speaker levels.AUDIO SYSTEM CODE9ON•OFFVOL+Operating AUDIO System FunctionsRCU600WMS_IB.qxd 6/5/03 16:55 Page 9