RCA RLC4036A Owner's Manual

Contents

13INSTALLATION(1)Open the battery compartment cover on the back side(2)Insert two 1.5V batteries of AAA type with correct polarity(3)Close the battery compartment cover on the back sideNotes on using the Remote control.Do not strike or drop the remote.Do not expose the remote control to liquids and do notplace it in humid environment.Do not install or place the remote control in direct sunlight.The heat may damage the remote control.INSTALLING BATTERIESNotes on Using BatteriesThe use of the wrong type of batteries may cause chemicalleaks and/or explosion.Please note the following:Always ensure that the batteries are inserted with thepositive and negative terminals in the correct directionas shown in the batteries compartment. Different typesof batteries have different characteristics. Do not mixdifferent types. Do not mix old and new batteries.Mixing old and new batteries will shorten battery lifeand /or cause chemical leaks from the old batteries.When batteries fail to function, replace them immediately.Chemicals which leak from batteries may cause skinirritation. If any chemical matter seeps out of the batteries,wipe it up immediately using a dry cloth.Due to varying storage conditions, the battery life for thebatteries included with your unit may be shortened.If the remote control is not used for a long period oftime, remove the batteries.12INTRODUCTIONThis is the code for remote control of LCD,if you want to change to auniversal remote control, you can edit this code into your universal remote control.REMOTE CONTROL KEY FUNCTIONSUniversal remote codeNot included.The universal code for this remote is: 2295.