RCA RLC5534A Instruction Manual

Contents

OSD Menu111. Picture menuDescriptionPicture mode: Select between Dynamic, Standard,Movie, User and Power Saving.You may select the picture mode directly by pressingthe PICTURE button on the remote control.Picture Settings: Press button to enter the Picture Settings menu.Screen Size: Select the displaying mode of the picture between Wide, Cinema, Zoom, Normal.PC Settings: If the video input signal comes from your PC, you may adjust the Vertical Position,Horizontal Position, Clock, Phase or even perform an Auto adjustment.Contrast: Control the difference between the bright anddark regions of the screen picture.Brightness: Adjust brightness of the picture.Color: Adjust color of the picture.Tint: Control the fresh tones to make them appear natural.Sharpness: Set the amount of fine detail in the picture.Color Temp.: Select between Normal, Cool and Warm.Note: when select the "Power Saving", themachine is in energy-saving status(4.1).OSD MenuAuto Adjust: Press OK button to setup the parameter ofthe screen automatically.Clock: Adjust the pixel clock frequency, until the imagesize is maximized for the screen.H/V Position: Adjust the transverse/vertical position ofthe screen.Phase: Adjust the phase of the ADC sampling clockrelative to the sync signal, until a stable image is obtained.Reset: Press OK button to reset the settings.