RCA RLDED3930A-RK User Manual

Contents

TV CHANNELS AREBLOCKEDCheck your auto lock function’s settings inside the OSD. You may have locked up some channels but forgotabout them.UNIVERSAL REMOTECODEThis TV follows NEC’s universal remote code. Please check your hand book for NEC’s codes then applythem.THE TV TURNS ON OROFF SLOWLY AND THESCREEN SHOWS UPSLOWLYThis TV is a High Definition liquid crystal display panel TV. It requires a few more seconds than normal TVsto power up and show the picture.NO SOUND ON PC Make sure you have a 3.5 mm mini-jack cable connected from your pc’s sound output to the TV’s VGASTEREO INPUT.HDCP VIDEO SAYS NOHDCP SUPPORTReboot your HDCP video device but turning them off and unplugging the power cord. Wait up to 8 minutesto plug the power back in to see if it works or not.HDCP VIDEO HAS NOAUDIOMake sure you have a 3.5 mm mini-jack cable connected from your HDCP video device’s sound output to theTV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain aRCA audio converted into 3.5 mm mini-jack cable.CANNOT GET 1360X768ON PC VGAMake sure the TV is recognized as plug and play monitor. Try updating your video card’s drivers as well. Ifthat does not help, most likely you’ll need to upgrade your video card to a newer one.PICTURE ISDISTORTED OR HASABNORMAL SOUNDThis might be from interference from large electrical appliances, cars, motorcycles, or fluorescent lights. Ifthe TV is close to the wall, try moving the TV to another room in your house to see if the problem still occurs.PICTURE DOES NOTCOVER THE ENTIRESCREENIf you’re using HDMI or a TV digital channel make sure you use the ASPECT button to switch to 16:9 format.If you are using VGA, use the AUTO ADJUST function to adjust to the screen. Please Note : If you are usingregular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 in order tofill up the screen. Please Note : This note this feature will distort the picture.PICTURE QUALITY ISHORRIBLE!!For best image quality, view HD widescreen programs where possible. If HD content is not available view“Standard Definition” from a digital source. Standard, analog TV will always be noticeable inferior to HDbecause your TV has video that is many times better than old TV’s and so you can see interference anddeficiencies you did not KNOW you had.PICTURE HAS PIXELSTHAT ARE ALWAYSDISPLAYING THESAME COLORYour TV is manufactured using an extremely high level of precision technology, however, sometimes somepixels of your TV may not display. Pixels defects within industry specifications are inherent to this type ofproduct and do not constitute a defective product.I CANNOT CHANGETHE TIME MANUALLYYour TV syncs time automatically according to your local TV channel. This function only works while theTV’s tuner is connected to an ANTENNA.BIG BLACK BOX INTHE MIDDLE OFSCREENYou have turned on closed captioning and are using TEXT1 – TEXT4. Change the setting to CC1 or turn offclosed captioning and the box will disappear.Problems Solutions