18Troubleshooting Tips• Unit doesn’t turn on- Check that batteries are properly inserted andnot exhausted.- Make sure battery compartment door is properlyclosed.- Make sure LOCK button is not activated.• Cannot format SmartMediaTM- SmartMedia TM card may have been damaged orworn out, replaced with a new one.- Make sure SmartMedia TM card capacity is notmore than 8MB.• Display keeps flashing when unit is off- You may not have set the time. Refer to sectionon Time Setting on p.8.• Cannot record- Check that SmartMedia TM card is properlyinserted, SmartMedia TM card icon on displayshould not be flashing.- SmartMedia TM card capacity may be full.- Make sure LOCK button is not activated.- Write-protect sticker should not be adhered onSmartMedia TM card.- SmartMedia TM card may have been damaged orworn out, replace new one.• Recordable time becomes shorter- You may have set the recording quality to ‘HighQuality’, refer to section ‘Setting RecordingQuality’.• Cannot perform playback- Check if SmartMediaTM card is properly inserted,SmartMedia TM card icon on display should not beflashing.EN5008 EN 8/28/01, 4:05 PM19