RCA SCENIUM HD50LPW166PK User Manual
                                                                                                | |
Contents
| 
Other InformationChapter 5 79TroubleshootingMost problems you encounter with your TV can be corrected by consulting the following troubleshooting list.Note for U.S. customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit youhome for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call1-888-206-3359. For additional assistance while using your RCA Scenium product, please visitwww.rcascenium.com/customersupport.TV ProblemsTV won’t turn on• Press the TV button or ON/OFF button while remote is in TV mode and there’s a source of power to the outlet or outlet strip.• Make sure the TV is plugged in.• You might have tried to turn on the TV during the lamp cool-down. Wait a few moments and the picture will appear.• Has the power light on the front of the TV been blinking for one minute? If so, the lamp may be dead. Refer to the Power indicatoris blinking or flashing section below for more information.• When you first plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 secondsand then go off during the initialization of the TV. This happens only when power is reapplied to the TV. The TV can only be turnedon after the Power indicator goes off.• Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else, such as a lamp.• Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check theremote control solutions on page 82.• Remote Setup might be set to the wrong option. Press MENU/OK on the front panel. Select Connections, then Special Features, thenRemote Setup. Choose TV (default).Power indicator is blinking or flashingIf the light blinks 5 times, pauses, and blinks again 5 times, the lamp is trying to turn on. If the TV doesn’t turn on after 5 minutes andthen the light blinks steadily for one minute, one of the following options is possible:• Lamp door may be open. Face the back of the TV. Locate the door at the bottom of the TV and close it. Turn off the TV and turnback on. The lamp should turn on.• Lamp may be dead. Go to page 83 for lamp replacement information.Buttons don’t work• If you’re using the remote control, press the TV button first to make sure the remote is in TV mode.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the FrontButton Block in the Parental Controls menu and choosing Front Buttons Unblocked.• Unplug the TV for five minutes and then plug it back in. Turn the TV on and try again.TV turns off while playing• Sleep Timer or Wake-Up Timer may have been activated. Go to page 75 for instructions.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If thishappens frequently, the voltage in your house may be abnormally high or low.• Unplug. Wait five minutes. Plug in again.TV turns on unexpectedly• Wake-Up Timer or Reminder from the TV Guide On Screen system may have been activated. Go to page 75, 47, or 51 forinstructions.• Initial Channel feature is enabled and you lost power to your TV. Go to page 71 for instructions. |
Related manuals for RCA SCENIUM HD50LPW166PK
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine