Connections and Setup12 Chapter 1Connecting External Speakers* to the MonitorThe monitor doesn’t have internal speakers, so in order to get sound you must connect external speakers. External speakerscan reproduce sound from VIDEO or RGB signal sources.External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo systemamplifier to the audio outputs.CAUTION: Unplug the monitor and all connected components before connecting external speakers. Use only speakerswith 6 to 8-ohm impedance and a power output rating of 7 watts or more.To connect external speakers directly to the monitor:1. Strip the ends of the speaker wires.2. Press down the tabs below the speaker terminals and insert the speaker wire and release the tab to secure the speakerwire connection.[a] Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire toRIGHT +.[b] Connect the right speaker negative (–) wire to RIGHT -.[c] Connect the left speaker negative (–) wire to LEFT–.[d] Connect the left speaker positive wire (+) to LEFT+.*Not included+-+-LEFTRIGHTVIDEO 1VIDEO 2VIDEO 3VIDEO INPUTSCONTROLLOCKon offRGB 1HD MONITOR INREMOTECONTROLEXTERNALCONTROLL (MONO)RAUDIO 1RGB 3DIGITAL RGBRGBC RYC BP RYP BH-SYNCV-SYNCBNC SELECT:/RGB2 /CMPNT2L (MONO)RAUDIO 2L (MONO)RAUDIO 3C RYC BYP BP RCMPNT 1
