RCA Scenium PHD50300 User Manual

Also see for Scenium PHD50300: Brochure & specs User guide

Contents

RCA Scenium PHD50300 User Manual Manual pdf 3 page image

Warnings and Safety PrecautionsThe monitor is designed and manul_ctured to providelong, trouble-free service. No maintenance other thancleaning is required. Use a soft dry cloth to clean thepanel. Never use solvents such as alcohol or thinner toclean the panel surface.The display panel consists of fine picture elements (cells).Although the display panels are produced with more than99.99 percent active cells, there may be some cells that donot produce light or remain lit.For operating safety and to avoid damage to the unit, readcarefully and observe the following instructions.To avoid shock and fire hazards:1. Provide adequate space for ventilation to avoidinternal heat build-up. Do not cover rear vents orinstall in a closed cabinet or shelves.The unit is equipped with cooling fans. If you installthe unit in an enclosure, be sure there is adequatespace at the top of the unit to allow hot air to rise andescape.If the monitor becomes too hot, the overheat protectorwill be activated and the monitor will be turned off. Ifthis happens, turn off"the power to the monitor andun-plug the power cord. If the room where themonitor is installed is particularly hot, move themonitor to a cooler location, and wait for the monitorto cool for 60 minutes.If the problem persists, contact your dealer for service.2. Do not use the power cord plug with extension cordsor outlets unless all prongs can be completely inserted.3. Do not expose unit to water or moisture.4. Avoid damage to the power cord, and do not attemptto modify the power cord..6.Unplug unit during electrical storms or if unit will notbe used over a long period.Do not open the unit which has potentially dangeroushigh voltage components inside. If the unit is damagedfrom opening the cabinet the warranty will be void.Moreover, there is a serious risk of electric shock.7. Do not attempt to service or repair tire unit. Tmnr isnot liable R)r any bodily harm or damage caused ifunqualified persons attempt service or open the backcover. Refer all service to authorized Service Centers.IMPORTANT TIPS: Caring for YourMonitorTo avoid damage and prolong operating life:1. Use only with 120V 50/60Hz AC power supply.Continued operation at line vohages greater than 12(1Volts AC will shorten the life of the unit, and mightcause a fire hazard.2. Handle the unit carefully when installing it.3. Locate set away from heat, excessive dust, and directsunlight.4, Protect the inside of tire trait from liquids and smallmetal objects. In case of accident, unplug the unit andhave it serviced by an authorized service center.5. Do not hit or scratch the panel surface as this causesflaws on the surface of tire screen.6. For correct installation and mounting it is stronglyrecommended to use a trained, attthorized dealer.7. Like all phosphor-based display devices, monitors canbe susceptible to uneven phosphor aging under cellaincircumstances. Certain operating conditions, such asthe continuous display of a static image over aprolonged period of time, can result in unevenphosphor aging if proper precautions are not taken. Toprotect your investment in this monitor, please adhereto the following guidelines and recommendations forminimizing the occurrence of uneven phosphor aging:Always enable and use your computer's screen saverfunction during use with a computer input source.Display a moving image whenever possible.Always power down the monitor when you arefinished using it.If viewing with a 4/3 aspect ratio for long periods oftime, set side gray level at 3 or 4.If the monitor is in long term use orcontinuous operation take the followingmeasures to reduce the likelihood of unevenphosphor aging:Lower the BRIGHTNESS and CONTRAST levels itsmuch as possihle without impairing image readability.Display an image with many colors and colorgradations (i.e. photographic or photo realisticimages).Create image content with minimal contrast betv, eenlight and clark areas (fi)r example, white characters onblack backgrounds). Use complementary or pastelcolor whenever possible.• Avoid displaying images with t)w colors and dislinct.sharply defined borders between colors.