Connections & SetupChapter 1 9Graphics contained within this publication are for representation only.Setting Up Your TVThere are several steps you need to follow before you can turn on the TV. Follow theinstructions below to setup and turn on your TV.ON/OFF MENU VOL CHPlug in the TVPlug the end of the cord from the power adapter into the DC POWERIN jack on the bottom panel of the TV. Then connect the end of thepower cord into the other end of the power adapter. Plug the endof the power cord into an appropriate wall outlet. Be sure to insertthe plug completely. Do not plug into an outlet controlled by a lightswitch.Put Batteries in the Remote• Remove the battery compartment cover from the back of the remote by pushing down onand sliding off the cover.• Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly.• Replace the cover.Turn on the TVThe first time you turn on your TV you need to turn on the main power to the TV by pressingthe Power button on the TV’s front panel. Then press the ON/OFF button on the TV orON•OFF button on the remote to power on the TV.Adjust the TV ScreenThe TV’s screen is adjustable simply by pushing on the top, front part of the screen, while yourother hand holds the base of the TV.