RCA scenium User Manual

Also see for Scenium: User guide User guide User guide User guide

Contents

RCA scenium User Manual Manual pdf 64 page image

62 Chapter 4Using the TV’s Menu SystemAuto TuningThis menu lets you specify the various components you have connected to yourTV. It lets you program a component button on the remote control (VCR, AUX,DVD, SAT/CAB, or AUDIO) so that pressing the button automatically turns onthe TV and turns the TV to the correct Video Input Channel (go to Chapter 3 fordetailed information).Notes: The AUX button by default is set up for a second RCA VCR. If youneed to reprogram the AUX button, or instead want to program the VCRbutton, use the 2001 code. Then use the VCR2 option in the auto tuningmenu to set auto tuning.If you have two RCA satellite receivers, you can control each separately.Program the second receiver with the AUX button using the 5001 code.Then use the RCA SAT2 option in the auto tuning menu to set autotuning.DTVLink SetupThe DTVLink Setup option lets you set items specific to the component(s)connected to your DTVLink (1394) jack(s).• DTVLink Connect applies to those DTVLink components that require aDTVLink and analog connection. Only that type of DTVLink componentswill appear. Highlight the choice field under your model, and press OK tochoose the analog input you’re using.• If you have more than one DTVLink component connected to your TV, theRecording Device menu allows you to choose which component you wantto use as your default to record when you press the RECORD button onyour remote and set. Go to page 49 for more information on setting aDTVLink recording and for an explanation of the options in the screen.Notes: The TV only outputs video and audio to a component whichenforces copy-protection measures.Some components that don’t support Digital Copy Protection may causeerrors on the DTVLink connection if another source that supports DigitalCopy Protected material is connected to the DTVLink.Special FeaturesThe special features are mostly intended for commercial/retail use.Initial Channel You can select the channel that your TV tunes to eachtime the TV is turned on by plugging it back in. Choose a video input orselect Antenna or Cable Input and select a channel.Initial Volume This feature works only if the Initial Channel feature is setto On. Select the volume level that you want when the TV is turned on.Maximum Volume This feature is intended to stop the volume from beingturned up too loudly. Set the volume at the loudest level you would want tohear.Initial Volume2Maximum Volume3CableCARD Tools4Remote Setup5Text hereInitial Channel1Go Back0Main Menu Connections Special FeaturesPress or to point to an option, then press OK toselect it. Press to return to the menu.Select what should occur when power is restored to the TV:Note: An Initial Channel setting of "On" will be enabled onlywhen the TV is plugged back in or electricity is otherwiserestored to the TV. Initial Channel is not enabled from theturning on of the TV with the remote or front buttons.On: Go toOn: Go to last input or channel selectedOff: Initial Channel is disabled999Channel Sub-channel 999Cable InputSpecial Features8Ethernet Setup9DTVLink Setup7Auto Tuning6Video Input Setup5Signal Source4Software Upgrade3Channel Search2Signal Strength1Go Back0Main Menu ConnectionsPress OK to select the channel or input that is tuned whenthe VCR key is pressed on the remote.Select which input or channel should be automatically tunedwhen a button listed below is pressed on the remote control.RCA SAT2Front InputSAT-CABLE (Satellite or Cable Box)Front InputDVDFront InputVCR2 (Aux default)Front InputVCRFront InputAUDIOFront InputSpecial Features8Ethernet Setup9DTVLink Setup7Auto Tuning6Video Input Setup5Signal Source4Software Upgrade3Channel Search2Signal Strength1Go Back0Main Menu ConnectionsTwo lines of help text will appear in this area to explain thefeature and instruct the user on how to use it.The DTVLink Setup menu has screens for setting up DTVLinkdevices to work with the TV.•DTVLink Connect: Set an analog input for a DTVLink device.•Recording Device: Select a default digital recording device.