REC PEAK Energy Series Installation Manual

Also see for PEAK Energy Series: Installation manual Installation manual

Contents

REC PEAK Energy Series Installation Manual Manual pdf 9 page image

REC Peak Energy Series Installation Manual - IEC 61215/61730Rev L- 09.14 Ref: NE-06-03-L99MaIntEnanCECleanIng InstruCtIonsREC Peak Energy panels have been designed for easy maintenance. normal rainfall will naturally clean the panels if installed at a sufficientangle. the need for cleaning will vary dependent on location, rainfall, pollution and angle of installation – the lower the angle of installation,the more cleaning will be required. to optimize electrical output it is recommended to clean the panels when dirt can be seen on the glasssurface.If dirt remains on the panel, it may cause cell shading which will reduce power output or even cause further damage. to clean either the frontor rear of the panels, use only deionized water at ambient temperature and a sponge, microfiber cloth or a soft brush to wipe away the dirt(rainwater, tap water or diluted alcohol may also be used as a secondary solution). For further cleaning a mild, biological and biodegradablewashing-up liquid may be used.when cleaning the panel, take care not to scratch the surface or introduce foreign elements that may cause damage. Ensure the water usedis free from grit and physical contaminants that may damage the panel. always rinse the panel with plenty of water. If soiling remains on thepanel, repeat the cleaning process. If stains require more effort to be removed, Iso-propyl alcohol of a concentration less than 10% may beused. acid or alkali detergent may not be usedCleaning of the panels should be carried out in the early morning when the panels are cool to avoid thermal shock.using a rubber squeegee, wipe the panel surface from the top downwards motion to remove any residual water from the panel glass. Panelscan be left to dry in the air or wiped dry with a chamois. avoid putting pressure on the panel surface when drying.For more information on cleaning REC panels, consult the Cleaning Information sheet available to download from the online REC DownloadCenter www.recgroup.com/downloads.system InsPeCtIonthe system should be inspected regularly to ensure that:• Fasteners are secure, tight and free from corrosion.• Electrical connections are secure, tight, clean, and free of corrosion.• the mechanical integrity of the cables is intact.• bonding points to ground are tight, secure and free from corrosion (which could break the continuity between the panels and ground).reCyClIngREC has made every effort to ensure panel packaging is kept to a minimum. the paper and cardboard packaging can be recycled and theprotective wrapping and panel separating blocks are also recyclable in many areas. Recycle according to local guidelines and regulations.DIsPosal of olD eleCtrICal anD eleCtronIC eQuIPment (aPPlICable to e.u. CountrIes only)Use of high pressure hoses or clearners is not permitted as these may damage the panel, laminate or cells.For installations in the European union, this product is subject to wEEE regulations. the symbol above indicates that this product shallnot be treated as household waste and must be disposed of at an appropriate collection point for the recycling of electrical and electronicequipment. the recycling of the different components and materials will help to conserve natural resources.by ensuring REC Peak Energy panels are disposed of correctly, you will help prevent potential negative consequences for the environmentand human health which could otherwise be caused by inappropriate waste treatment. For more information about recycling of this product,please contact your local recycling authorities or recycling center.