REED R2020 Instruction Manual

Also see for R2020: Instruction manual Instruction manual

Contents

REED R2020 Instruction Manual Manual pdf 7 page image

reedinstrumentswww com 7Pantone 534 BluePantone 123 YellowPantone 485 RedPantone 123 YellowPantone 534 BlueBlack Rich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:Pantone 534 Blue - 100/80/30/5Pantone 485 Red - 10/100/100/5Dewpoint MeasurementIn the main menu, highlight and select the DEWPOINT function. TheDewpoint function measures IR temperature, air temperature, relativehumidity, dewpoint temperature, and wet bulb temperature. The bottomgradient bar displays the current temperature/dewpoint ratio percentage.Press and hold the trigger to take a measurement.DataloggingIn the main menu, highlight and select DATALOG. You will enter theDatalog setup screen where you can adjust the datalogging parameters.To adjust the parameters highlight the parameter with the Up and Downbuttons and select it with the Enter button. You can adjust the tempera-ture by small increments by pressing the Up and Down buttons and bylarge increments by pressing and holding the Up or Down buttons. Adjustthe measurement timing increments and the bar-graph colour by press-ing the up and down buttons when they are selected. Press Enter on theMeasure Set parameter to adjust the measuring mode, such as dewpoint,ambient temperature/RH%, or Type-K thermocouple probe. After youhave set all of the parameters press the trigger to begin datalogging. Themeter will continuously take measurements while in Datalog mode. Tosave and exit Datalog mode press the ESC button.Saved DataIn the main menu, highlight and select DATA MEMORY to enter the SavedData menu. Highlight and select Picture, Video, or Logs to view the saveddata.Browsing PicturesPress the Up and Down buttons to scroll through the picture thumbnails,and press the Enter button to see the picture full screen. You can scrollthrough the full screen pictures by pressing the Up and Down buttons. Todelete a picture, view it full screen and press the Enter button. Confirm bypressing the Up button and cancel by pressing the Down button. Exit fullscreen and the Picture Browsing screen by pressing the ESC button.continued ...1.888.475.5235info@REED-Direct.com REED-Direct.com