REED SD-8205 Instruction Manual

Contents

REED SD-8205 Instruction Manual Manual pdf 12 page image

reedinstrumentswww com 12ne 534 Bluene 123 Yellowne 485 Redne 123 Yellowne 534 BlueRich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:Enter Button to save the setting as the default. To exit “AdvancedSettings”, press the Esc Button.Auto power OFF management1) When the lower display shows “PoFF”, use the Up or Down But-tons to select the value “yES” (Enable Auto Power Off) or “no”(Disable Auto Power Off.2) After selecting “yES” or “no”, press the Enter Button to save thesetting as the default. To exit “Advanced Settings”, press the EscButton.Set Beeper Sound ON/OFF1) When the lower display shows “bEEP”, use the Up or Down But-tons to select “yES” (Beeper Sound is ON) or “no” (Beeper Soundis OFF).2) After selecting “yES” or “no”, press the Enter Button to save thesetting as the default. To exit “Advanced Settings”, press the EscButton.Set sampling time1) When the lower display shows “SP-t”, use the Up or Down Buttonsto adjust the value to either 0, 1, 2, 5, 10, 30,60, 120, 300, 600,1800, or 3600 seconds.2) After the Sampling value is selected, press the press the Enter But-ton to save the setting as the default. To exit “Advanced Settings”,press the Esc Button.SD memory card FormatPlease Note: Formatting the SD card erases all data from that SD card.1) When the lower display shows “Sd F”, use the Up or Down Buttonsto select “yES” (format the SD card) or “no” (do not format the SDcard).2) To format your SD card, select “yES” and press the Enter Button.The Display will show “yES Enter”, to confirm. Press the Enter But-www. GlobalTestSupply .comFind Quality Products Online at: sales@GlobalTestSupply.com