REED SD-947 Instruction Manual

Also see for SD-947: Instruction manual Instruction manual

Contents

REED SD-947 Instruction Manual Manual pdf 10 page image

10Pantone 534 BluePantone 123 YellowPantone 485 RedPantone 123 YellowPantone 534 BlueBlack Rich Black -20/20/20/100Blue - 100/80/30/5Yellow - 0/27/100/0Red - 10/100/100/5Yellow - 0/27/100/0Blue - 100/80/30/5Only if you REALLY need them:Pantone 534 Blue - 100/80/30/5Pantone 485 Red - 10/100/100/54). Now.you.need.to.set.the.decimal.format..The.numerical.data.structure.downloaded.to.the.SD.card.is.defaulted.used.the.“..”.as.the.decimal,.for.example.“20.6”.“1000.53”..But.in.certain.countries.the.“.,.”.is.used.as.the.decimal.point,.for.example.“20,6”.“1000,53”..See.Advanced.Settings.section.of.this.manual.for.instructions.on.how.to.change.the.Decimal.Character..Auto Datalogger (Set sampling time ≥1 second)1). Start.Datalogging;.press.the.REC.Button,.and.the.“REC”.symbol.will.appear.on.the.LCD.screen,.then.press.the.Logger.Button,.the.“REC”.symbol.will.flash.while.the.measuring.data.and.time.informa-tion.is.being.saved.in.memory..To.set.the.sampling.time,.and.to.toggle.the.beeper.sound.on.or.off,.refer.to.the.Advanced.Settings.section.of.this.manual.2). Pause.the.Datalogging;.while.Datalogging,.if.press.the.Logger.But-ton.once..While.paused,.the.“REC”.symbol.will.stop.flashing..Press.the.Logger.Button.again.to.resume.Datalogging,.and.the.“REC”.symbol.will.begin.to.flash.again.3). Stop.Datalogging;.while.the.Datalogger.function.is.paused,.press.the.REC.Button.for.2.seconds..The.“REC”.symbol.will.disappear.indicating.the.Datalogging.function.has.stopped..Manual Datalogger (Set sampling time = 0 seconds)1). Set sampling.time.is.to.0.second;.Press.the.REC.Button,.and.the.“REC”.symbol.will.appear.on.the.LCD.screen..Press.the.Logger.Button,.and.the.“REC”.symbol.will.flash.once.and.one.Beep.will.sound,.at.the.same.time.the.measuring.data.along.the.time.infor-mation.will.be.saved.in.memory..The.lower.Display.will.show.the.Position.(record).number,.which.is.saved.as.well..2). To.Change.the.Position.Number;.press.the.Down.Button.and.the.lower.position.number.will.flash.on.the.display..Press.the.Up.or.Down.Buttons.to.set.the.Position.Number.(1.to.99).to.help.identify.the.measurement.location..The.lower.Display.will.show.P.x.(x.=.1.to.99)..After.the.position.number.is.selected,.press.the.Enter.Button.to.confirm. continued...www.actoolsupply.comwww.actoolsupply.com