reedinstrumentswww com 7WARNINGS1. Do not store or operate the instrument in high temperatureand high humidity environments.2. When not in use for long periods of time, remove the batteryto avoid battery liquid leakage which will cause damageto the instrument.3. When using the instrument in the presence of wind, it is a mustto use the windscreen (included) to avoid picking up undesiredsignals (sounds).4. Keep microphone dry and avoid severe vibrations at all times.5. Without battery, the last 1.5 hours (maximum) of data will be lost.6. You have to setup the DataLogger software before using it.Software Installation & Operation1. Start windows2. Insert the CD into the CD-ROM3. Run SETUP.EXE installation program in file DISK1,install it to the directory of C:\Program Files\Sound Datalogger\.4. Setup the USB-driver5. Plug the Datalogger to the USB port, system will find andinstall the USB-driver. Select the relevant Driver under thedirectory which the software installed in the step 3.6. After Driver installation, a “USB I/O controlled devices”will appear in the Device Manager. You can find“Silabs C8051F320 USB Board” under this directory.Thus software and driver are installed.7. Double click the “ ” icon to start the software, then select“Instrument-DataLogger Setup” to set the sound level DataLogger.Click “setup” to read the setup information to the DataLogger.continued ...