User Manual 1260-60A/BModule Specific Syntax 3-2line by separating the path designators by commas. Commandlines terminate at the end of the line.Commands The Module Specific Syntax for the 1260-60A,B is required foruse in the OPEN and CLOSE commands. It will also appear indata output by the 1260 Series Master in response to thePDATAOUT command.OPEN For OPEN, the syntax is:OPEN .-Example:OPEN 3.000,004-011,100-111,201,203CLOSE For CLOSE, the syntax is:CLOSE .-CLOSE 3.000,004-011,100-111,201,203PDATAOUT The PDATAOUT command causes the specified module totransmit the CLOSED state of the relays in the 1260-60A,Bmodule. The syntax used is:PDATAOUT [;][;]....The response to the PDATAOUT command for the 1260-60A,Bis as follows:. [,...] no>[,...] .ENDwhere 1260-60A,B: . 1260-60A,B Triple SPDTMICROWAVE SWITCHING MODULENote the actual sent is determined by the setting of theID Byte DIP switches on the module.Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com