Rackmount CYBER VIEW RP-1020QD User Manual
                                                | |
Contents
| 
P.3711.5 Quad Display On-screen Menu Chapter 11Right after the unit is turned on, The monitor will display the last setting on the Setup Menu.CH TITLEQUADDWELL TIME03S1 CH 1 03 S2 CH 2 03 S3 CH 3 03 S4 CH 4 03 SLIVE VIDEO FREEZE ONVIDEO OUT: LIVE QUADTITLE: ON ONTIME: 23 : 10 : 10 ON ONDATE: 12 - 25 - 2003 ON ON1. Page 1 of the Setup Menu - Display SettingPush Setup buttons (#1, #2) simultaneously to display the Setup Menu on the screen. There are total two pages in theSetup Menu. Page 1 is used to program TIME, DATE, and camera TITLE. Page 2 is used to program Alarm Operations.Under this mode, channel selection buttons (#5) on the front panel are used for cursor control and text selection. Use thecursor control buttons "<" and ">" to move the cursor to the location as desired to program, and use the text select but-tons " " and " " to choose the right alphanumeric character to program.Page 1: Setting the TIME, DATE, TITLE, and DWELL time:1.1 TITLE setup:The Title menu permits the setup of separate titles for each video channel. 8 characters may be entered for each videochannel. The available alphanumeric characters are:0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D,..... X, Y, Z, . , :, - , / , < , > , , , space ,1.2 DWELL Time setup:The Dwell time menu permits setting the dwell time for all cameras and the Quad Screen on the LIVE output channel.The menu shows a table of all cameras and associated dwell time. Dwell time can be programmed by setting a numberbetween 00 to 99 for each channel in the menu.■ 01 through 99: Adds the camera input to the auto switching SEQUENCE, with the corresponding dwell time in sec-onds.■ 00: Skips the camera input in the auto switching SEQUENCE.1.3 TIME/DATE setup:Time and date information can be displayed on the video output channel through both LIVE and QUAD connector. Bot-tom of page 1 is used to set the values of time and date and also to enable or disable the display at each output channel.The date and time will display in the “MM-DD-YYYY HH:MM:SS” format for NTSC model and “DD-MM-YYYYHH:MM:SS” format for PAL model.1.4 TITLE/TIME/DATE disable and enable on LIVE and QUAD video output channel:The Title/Time/Date display on each output channel can be enabled or disabled by setting ON or OFF in the correspond-ing entry. |
Related manuals for Rackmount CYBER VIEW RP-1020QD
This manual is suitable for:
CYBER VIEW RP-1020QDCYBER VIEW RP-117QDCYBER VIEW RP-119QDCYBER VIEW RP-120QDCYBER VIEW RP-817QDCYBER VIEW RP-919QDCYBER VIEW RP-W119QDCYBER VIEW RP-W819QDCYBER VIEW RP-W922QDCyerView RP-1020QDCyerView RP-117QDCyerView RP-119QDCyerView RP-120QDCyerView RP-817QDCyerView RP-919QDCyerView RP-W119QDCyerView RP-W819QDCyerView RP-W922QD
manualsdatabase
Your AI-powered manual search engine