Radiant HL2-DS-30-65 Installation Manual
                                        | |
Contents
| 
CLEARANCES TO COMBUSTIBLES (in inches)FIRE HAZARD. Always maintain published clearances to combustibles.In locations used for the storage of combustible materials, signs must beposted. Consult manual for additional guidelines.MODEL NO.SIDE(S)HL2-DS-30-65/HL2-DS-30-800°30°0°30°692545251012127764ENDS1212TOP69BEHIND2510FRONT2536END VIEW0° MountingSIDE VIEW END VIEW30° Mounting* Heaters mounted on an angle between 0° and30° must maintain clearances posted for 0° or30°, whichever is greater.** This heater must be installed at least 79” abovethe floor/ground level (as applicable).EndEndBELOW**6047Max.30˚ AngleTopTopFrontSide SideBelowBelowBackLLTCL018-5c-12/17 (CDS)MOUNTING ANGLE*HL2-DS-30-100This heater must be installed in accordance with the manufacturer’sinstruction and local codes, if any. In absence of local codes, follow thelatest edition of the National Fuel Gas Code, NFPA 54 (ANSI Z223.1) orthe CAN/CCA B149 installation codes.Hot while in operation. DO NOT Touch. Keep children, clothing, andcombustible materials away. DO NOT store combustible materials underthis heater while in operation.Keep burner and control compartment clean. See installation andoperating instructions accompanying heater.APPLICATION: Minimum mounting height 79” above finished floor.If this appliance is installed in one or more of the following locations, then the installationmust be in accordance with the latest edition of the applicable standard(s):• Aircraft Hangers - ANSI / NFPA 409• Parking Structure - ANSI / NFPA 88A• Repair Garages - ANSI / NFPA 88BLLTCL016a-1x-05/17 (CDS)SAMPLEWARNING!Read and understand all safety information and warnings in this manual beforeinstallation, operation, and maintenance of the radiant tube heater system.CLEARANCES TO COMBUSTIBLES (in inches)FIRE HAZARD. Always maintain published clearances to combustibles.In locations used for the storage of combustible materials, signs must beposted. Consult manual for additional guidelines.MODEL NO.SIDE(S)HL2-DS-30-65/HL2-DS-30-800°30°0°30°692545251012127764ENDS1212TOP69BEHIND2510FRONT2536END VIEW0° MountingSIDE VIEW END VIEW30° Mounting* Heaters mounted on an angle between 1° and30° must maintain clearances posted for 0° or30°; whichever is greater.** This heater must be installed at least 79” abovethe floor/ground level (as applicable).EndEndBELOW**6047Max.30˚ AngleTopTopFrontSide SideBelowBelowBackLLTCL016b-1M-08/17 (CDS)MOUNTING ANGLE*HL2-DS-30-100This heater must be installed in accordance with the manufacturer’sinstruction and local codes, if any. In absence of local codes, follow thelatest edition of the National Fuel Gas Code, NFPA 54 (ANSI Z223.1) orthe CAN/CCA B149 installation codes.Hot while in operation. DO NOT Touch. Keep children, clothing, andcombustible materials away. DO NOT store combustible materials underthis heater while in operation.Keep burner and control compartment clean. See installation andoperating instructions accompanying heater.APPLICATION: Minimum mounting height 79” above finished floor.If this appliance is installed in one or more of the following locations, then the installationmust be in accordance with the latest edition of the applicable standard(s):• Aircraft Hangers - ANSI / NFPA 409• Parking Structure - ANSI / NFPA 88A• Repair Garages - ANSI / NFPA 88BLLTCL016a-1x-05/17 (CDS)HL2-40-125NData on this label is for the model shown on this label. If your heater has been converted,this information is not accurate. Please contact the factory for assistance.BURNER COMPONENTS:For parts replacement information, contact factory at 586-756-0950 or visit www.drp-co.com/parts.Serial No.: 0914XXXXXXXXXX 0001Gas Valve:Circuit Board:Wire Harness:N.O. Switch:N.O. VL Orifice:N.C. Switch:N.C. VL Orifice:Diff Switch:Diff VL Orifice:Igniter:Burner:16” Tube:Ind. Lights:Diag. Light:Term. Block:Transformer:Fan:Alt. Fan:Alt. Fan Usage:Relay:Filter:24 Volt In:120 Volt In:Gas In:Extra VL Orifice:Production Code:Version:Stock:Add-On:Internal Use Only:HEATERTYPE: Electric:Tag:Special 1:Special 2:Gas:Air:C1C1 C2 C3NoneN/AHL2-1259.1436E96-224-NMicro60-243 PCS HarnessNoneNoneNoneNoneIS22010051F5169Grey (+ / -)NortonLow-Mid4” Gen.Yellow - 120V(Specify TP-#’s)840851852N/AN/A264E503072380828On Circuit BoardNone40 VAFasco Lg.50Hz - 120VWhen SpecifiedNoneNone3 T-plug2 x 4 Box7/8” FC FlareNoneN/A82655A55BN/AN/A832668331 1/2”TP-204#TP-44#31 5/8”LLWT038None31 5/8”Micro60Plug-Wh.Orifice Type:DETROIT RADIANT PRODUCTS COMPANY21400 HOOVER ROAD - WARREN, MI 48089(586) 756-0950 www.reverberray.comLOW-INTENSITY INFRARED HEATERMAX. HEAT INPUTMAX. DEBIT CALORIFIQUEMIN. HEAT INPUTMIN. DEBIT CALORIFIQUEVENT CATEGORYÉVENT CATÉGORIEBTU/hBTU/hVOLTAGEAMPSPHASEFREQUENCYHzVAC112671MANIFOLD PRESSUREPRESSION A LA TUBULURE D'ALIMENTATIONMAXIMUM INLET PRESSUREPRESSION D'ALIMENTATION MAXIMALEMINIMUM INLET PRESSURE FOR PURPOSE OF ADJ.PRESSION D'ALIMENTATION EN GAS MIN. ADMISEINCHES W.C.INCHES W.C.INCHES W.C.RADIATEUR À INFRAROUGE À FAIBLE INTENSITÉORIFICE SIZEDIM DE L'INJECTEURTHIS DESIGN COMPLIES WITH STANDARD(S):COMPLES DE CETTE CONCEPTION AVEC LA NORME:HEATER BUILD TYPETYPE OF GASTYPE DE GAZMIN. MOUNTING ANGLEMIN. ANGLE DE SUPPORTMAX. MOUNTING ANGLEMAX. ANGLE DE SUPPORTMODEL NUMBERNUMÉRO DE MODÈLESERIAL NUMBERNUMÉRO DE SÉRIEVERSIONFOR U.S.A. THIS HEATER IS APPROVED FOR ALTITUDES OF 0-2000 FT.IN CANADA FOR ALTITUDES OF 4-4500 FT (0-1,370M) ABOVE SEA LEVELAU CANADA POUR ALTITUDE DE 0 A 4500 PIEDS (0-0,370M) D’ALTITUDEFOR OUTDOOR USE ONLYMADE IN U.S.A.80,00052,000CATEGORY I1.2SINGLE601203.514.05.022 D.M.S.C1NATURALANSI Z83.20-2016 • CSA 2.34-2016 Low-Intensity Infrared Heater 0°30°HL2-DS-30-80N YYMMREPCSHIPPE#### 09/17Detroit Radiant Products Company21400 Hoover Road Warren MI 48089(586) 756-0950 www.reverberray.comLOW-INTENSITY INFRARED HEATERMAX. HEAT INPUTMAX. DEBIT CALORIFIQUEMIN. HEAT INPUTMIN. DEBIT CALORIFIQUEVENT CATEGORYÉVENT CATÉGORIEBTU/hBTU/hVOLTAGEAMPSPHASEFREQUENCYHzVACMANIFOLD PRESSUREPRESSION A LA TUBULURE D'ALIMENTATIONMAXIMUM INLET PRESSUREPRESSION D'ALIMENTATION MAXIMALEMINIMUM INLET PRESSURE FOR PURPOSE OF ADJ.PRESSION D'ALIMENTATION EN GAS MIN. ADMISEINCHES W.C.INCHES W.C.INCHES W.C.RADIATEUR À INFRAROUGE À FAIBLE INTENSITÉORIFICE SIZEDIM DE L'INJECTEURTHIS DESIGN COMPLIES WITH STANDARD(S):COMPLES DE CETTE CONCEPTION AVEC LA NORME:HEATER BUILD TYPETYPE OF GASTYPE DE GAZMIN. MOUNTING ANGLEMIN. ANGLE DE SUPPORTMAX. MOUNTING ANGLEMAX. ANGLE DE SUPPORTMODEL NUMBERNUMÉRO DE MODÈLESERIAL NUMBERNUMÉRO DE SÉRIEVERSIONCOMBUSTION CHAMBERTHIS HEATER IS TO BE UN-VENTED ONLYFOR OUTDOOR USE ONLY.MADE IN U.S.A.80,00052,000N/A - UNVENTED4.8SINGLE601203.514.05.018 D.M.S.ANSI Z83.20-2016 • CSA2.34-2016 RADIANT TUBE HEATERC1NATURAL0°30°HL2-DS-30-80N YYMMREPCSHIPPE#### 09/17TP-877112671SAMPLEHL2-DS-30-80N4HL2-DS Series1.0 Introduction • Safety Labels and Their LocationsBack PanelTop PanelBottom PanelRating PlateF/N: LLTB018 (Natural Gas)F/N: LLTB019 (Propane Gas)F/N: LLTCL018Clearances to Combustibles LabelF/N: LLTCL016aSafety LabelF/N: LLLOGO032Burner Control BoxComponent Label (locatedunder the top panel)Product safety signs or labels should be replaced by the product user when they no longer are legible.Contact either your local distributor or the product manufacturer for obtaining replacement signs orlabels.Safety Labels and Their Locations |
Related manuals for Radiant HL2-DS Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine