Radio Shack PRO-668 User Manual

Contents

20 21Recording and PlaybackYour iScan contains a 2GB MicroSD card that can store over50 hours of recording time. After you activate the recordingfeature, you can record all transmissions for specific objectsand transmissions found during a search.To enable the recording feature:1. Press MENU to access the main menu.2. Select Settings and press .3. Select Enable Record and press .4. To record during frequency searches, select SearchRecord and press .5. Select Save Changes and press .6. Edit the object and activate the Record setting. See"Editing Objects Manually" on page 20.To play back recordings:1. Press MENU to access the main menu.2. Select Playback and press .3. Press /II to play the file.4. You can press MENU for a list of playback options:• Main Menu – Returns to the main menu.• Back – Returns to the list of recorded files.• Play From Here – Plays the current recording andall recordings afterwards.• Delete All – Deletes all recorded audio files.• Delete Earlier – Deletes recorded audio files priorto the selected audio file.• Delete Later – Deletes the selected audio file andall recorded audio files after the selected file.5. Press SKIP to stop playback.Editing Objects Manually1. From the main menu, select Browse Objects.2. Use the four-direction pad to select an object.NOTE: Your iScan organizes imported objects beginning atPlaylist 151, named by service. Playlist 1 may be empty.3. Press MENU to enter the Object Edit menu:Frequency The frequency for the object.Alpha Tag The display name for the object.Set Playlists Assign the object to playlists.Rx Mode Receiving modeSq Mode Squelch modeSq Search Activates a search for the Squelch codeSq Code Squelch codeSq Exclude Excludes squelchLocked Out Locked objects are not scanned.Skipped Skipped objects are not scanned.Priority Priority object are checked more frequently.Delay Set a scan delay after a transmission ends.Attenuate Applies attenuation to the objectAGC Reduces interference from strong localtransmitters (conventional frequencies only).Alarm Select a sound used for alarms.Light On, Off, or Flash.Flash Pattern Alert LED flash pattern.*On Time / OffTime Flash pattern step duration. (Percentage: 100= 1 second, 50 = 1/2 second).LED Enabled Enables the Alert LED.LED Flash Enables Alert LED flash patterns.Color Count The number of Alert colors. 0 = off.Color 1-4 Hexidecimal value for each color.Record Record received transmissions.( = Record this object)Delete Object Deletes the programmed object; thefrequency remains in the iScan library for laterprogramming, if desired.5. Use the four-direction pad and SEL button to changesettings. ( = selected)6. Select Save Changes and press SEL.PreviousNextForwardRewindDRAFTDRAFT