RadioLink T8S Instruction Manual

Also see for T8S: Instruction manual User manual User manual User manual User manual

Contents

RadioLink T8S Instruction Manual Manual pdf 12 page image

Radiolink Electronic Ltdwww.radiolink.com8(DIS)CONNECT: When APP is opened on the mobile, T8S will be connected automatically. If can’t be identified,click DISCONNECT then CONNECT again.READ: Click READ, the APP will start reading the data in T8S, the process won’t complete until 4 D sounds areheard. Every time reopen the APP, the data displayed are default. If any parameter is changed, it can’t bedisplayed until clicking READ.UPDATE: Click to update the changed data into the T8S and a D sound means update complete. If no D soundmeans update failure. Click UPDATE each time parameter is modified.SAVE: Click to save the APP data in the /model/model01.text in the mobile and APP will automatically create amodel01. txt file.LOAD: Click LOAD and the APP will take the data from /model/model01.txt. APP will notify if this file can’t befound.CLOSE: Click Close to exit.Note There is T8S(T8FB) voltage displaying on each menu.Parameters Setting Steps When parameters need to be modified, click READ first to input the original data into the software, thenmodify as wish and click UPDATE to output the modified data to T8S. When parameters SAVE as TXT file need to be input, click LOAD first to input the saved data into thesoftware then click UPDATE to copy them to T8S.3.3.1 SERVO MenuThe 8 rectangles shows the CH1-CH8 servos range(4 basic channels and 4 auxiliary channel) from left to right.