ppbRAE 3000 User’s Guide81Lamp IDThe ppbRAE 3000 does not automatically identify the type of lamp,so you must select a lamp type manually.1. Scroll through the menu by pressing [N/-].2. Press [Y/+] to make a selection.3. Press [MODE] when you are done.4. Press [Y/+] to save your choice or [N/-] to undo your selection.PAN IDThe ppbRAE 3000 and any other devices that you want tointerconnect wirelessly must have the same PAN ID. You can set thePAN ID in the instrument or through ProRAE Studio II.1. Press [N/-] to advance through the digits from left to right.2. Press [Y/+] to ] to advance through the numbers (1, 2, 3, etc.).3. Press [MODE] to register your choice when you are done.Mesh ChannelNote: For mesh radio modems operating at 868MHz, only channel 0is available. For other frequencies, channels 1 through 10 are allowed.1. Press [Y/+] to increase the number and [N/-] to advance tothe next digit.2. After moving to the last digit and making changes, press[MODE]. Press [Y/+] to save the change. Press [N/-] to undo the change.Mesh IntervalSet the time interval at which the instrument’s mesh radio sends out asignal. This can range from once every 10 seconds to once every four
