Simple to use:Find your fixed LEFT edge.Using the palm of your hand, turnthe center cap to the right until itstops. Then turn it to the left until itstops. This is your fixed left edge.Arc is preset to rotate 180º.Adjusting the Pattern.Using a screwdriver, adjust thearc dial clockwise (+) to increasethe arc or counterclockwise (-)to decrease the arc. Pattern isadjustable from 40º to 360º.Do not turn past right or leftstop. Adjust wet or dry.Adjusting the Radius.Using a screwdriver, turn radius-reduction screw to reduce radiusup to 35%. Adjust wet or dry.32SA POP-UPGEAR DRIVEN ROTOR“SA” for Simple Adjust“SA” for Simple AdjustReplacescompetiveproduct such asOrbit© Saturn III™Pressure PSI 25 35 45 55Radius ft. 29 31 31 32Flow GPM 2.17 2.60 3.00 3.253.0 Pre-Installed Nozzle* Performance ChartSPRAYS 19 TO 32 FEETADJUST FROM 40-360ºREADY FOR INSTALLATIONSPRAYS 19 TO 32 FEETADJUST FROM 40-360ºREADY FOR INSTALLATION1/2” INLET1/2” INLET*Rain Curtain ™Nozzle Technologyfor even water distribution