Rain Bird EZ1-D Programming Instructions Manual

5MANUAL WATERING FOR A PROGRAMSETCLOCK &PROGRAMSTATIONRUNTIMEWHICHDAYS TOWATERMANUALON/STA.ADVANCETIME OFDAY TOWATER PGM A/CSYSTEMOFF/AUTOStation #1, “C” ProgramPress SETCLOCK &PROGRAM repeatedly to get the “PA” display. Then, if you only want to startDisplay will indicate:program “C” press PGM A/CIndicates watering will occur, and will count down until watering time is complete.Note: When a station is watering, the station number and program will appear as thefirst two digits in the display. The digit(s) to the right will blink throughout the wateringtime. The manually started program will water all stations on that program and then re-turn to automatic mode and await the next scheduled automatic start.ADVANCING TO THE NEXT STATION OF A PROGRAM(BEFORE PROGRAMMED WATERING IS COMPLETED)SETCLOCK &PROGRAMSTATIONRUNTIMEWHICHDAYS TOWATERMANUALON/STA.ADVANCETIME OFDAY TOWATER PGM A/CSYSTEMOFF/AUTOSETCLOCK &PROGRAMSTATIONRUNTIMEWHICHDAYS TOWATERMANUALON/STA.ADVANCETIME OFDAY TOWATER PGM A/CSYSTEMOFF/AUTOPress MANUALON/STA.ADVANCE . The station which was wateringwill stop. The next station in sequence that is as-signed to the program, will begin watering andcontinue through its programmed watering time.Digits at right of display will blink and count downuntil cycle is completed. If digits at right do notMONITORING STATIONOPERATIONto display the “PC.” to start the program.Next, press MANUALON/STA.ADVANCEblink, then press repeatedly until desiredstation number appears at left of display again.Digits at right should now blink.STATIONRUNTIME

/ 7

Related manuals for Rain Bird EZ1-D