Raleigh Array Technical Manual
               | |
9Electrical System Technical Manual1. Connect the charger (A) to the mains voltage.2. Connect the plug (B) of the charger to the contact point of the batterypack (C).3. When you charge, the light (D) is red. When the battery pack is fullycharged the light turns green. The charge is stopped automaticallyafter 24 hours. The light on the charger remains green.• A full charge will take about 4.5 hours.• The battery pack can be charged both in and outsidethe bicycle.• When placing back, pay attention to the contactpoints of the docking station (E).The battery pack has been securedagainst theft with a lock.• Insert the key (A) supplied in thelock of the battery pack (B) and turnit 180 degrees.• Make sure that the cover (C) of thecharging plug is closed.• Carefully slide the battery pack (B)out of the luggage carrier.• Always use both hands to pick thebattery pack, to prevent it fromfalling.• If you transport the bike in a car,always take the battery pack out ofthe luggage carrier.Battery pack and charger4.2 Charge the battery pack4.3 Take out the battery pack under rear rackBECD AACB CBACB CBB AAAB• Carefully slide the battery pack (A)into the luggage carrier. Here payattention to the contact points ofthe battery pack and of the dockingstation (B). |
Related manuals for Raleigh Array
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine