Ramblewood Green GC2-48N User Manual
Also see for GC1-28N: User guide
                    | |
HOW TO USE THE COOKTOPGAS BURNERSGas flow to the burners is adjusted by turning the knobs which control the valves. Turning theknob so that the indicator line points to the symbols printed on the panel achieves the followingfunctions: When knob is rotated to the maximum position it will permit the rapid boiling of liquids,whereas the minimum position allows the simmer warming of food or maintaining boilingconditions of liquids. To reduce the gas flow to minimum, rotate the knob further counter-clockwise to point the LoPosition. Other intermediate operating adjustments can be achieved by positioning the indicatorbetween the HI and Lo positions, and never between the HI and OFF position. When the range is not being used, set the gas knobs to their OFF positions and also close thegas shut-off valve placed on the main gas supply line.LIGHTING GAS BURNERS Any film or stickers on the cooktop surface should be removed before use. All operations are performed by means of all control knobs. Knob controls electricignition, safety device & flame level. To ignite, push and turn the knob for 1~2 seconds in a counterclockwise direction up tothe HI position (Maximum rate), push in and hold the knob until the flame has been lit.The sparks produced by internal igniter will light the designated burner. In the event that the local gas supply conditions mark it difficult to light the burner in theHI position, try again with the knob in Lo position. To re-light the burner, return the knob to the OFF position and repeat the operation forlight. To shut off burner, turn the knob in clockwise direction, to OFF position.CHOSE OF THE BURNERS AND PANSFor greater efficiency and lesser gas consumption, use the pots and pans with the right14 |
Related manuals for Ramblewood Green GC1-28N
manualsdatabase
Your AI-powered manual search engine