6 9880015700 E OVEN RANGEMASTER 03-2006ELECTRONIC PROGRAMMER, Fig. 11The Clock:You can use the timer to turn the ovens on and off. The clock must be set to the time of day before the ovens will work.To set the time of dayorPress as above. Then press (-) or (+) until the correct time shows. Once time has been set, wait 5 seconds to register thenew setting. Don’t forget it’s a 24 hour clock. If you make a mistake or press the wrong button, turn off the powersupply for three minutes and start again.To time something that’s cooking (minute minder):Press the Then after press theMinute Minder ( ). (-) or (+) until the time you wantto cook for is shown.You can check time remaining by pressing ( ) and cancel the beeper by pressing ( )To stop automaticallyUse when you have started the oven manually.Press the Stop Time ( ) button.Then after press (-) or (+) until your required ‘Stop Time’ shows. “AUTO” will show in the display. When yourcooking is finished the beeper sounds. TURN THE OVEN KNOB TO 0 FIRST, then press ( ) once to stop the beep,press ( ) again to return to manual cooking.To start and stop the oven automatically. You must first set required Oven Function and cooking Temperature.Before you set the clock, you must have two numbers clearly in mind.The ‘cook period’, which is the period of time you want the oven to cook.The ‘stop time’, which is the time of day you want the oven to stop cooking.You cannot set a start time directly - this is set automatically by setting the cooking period and stop time.Press the Press the StopCook Time ( ) button. Time ( ) button.Then press the Then press the(-) or (+) until your (-) or (+) until yourrequired ‘cook period’ shows. required ‘stop time’ shows.AUTO will show in the display.