Rangemaster CLassic / Professional +Kitchener / Hi-LITE User's Manual & Installation Instructions

Also see for 100 Dual Fuel: User's guide & installation instructions User guide User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions

104. To activate repeat steps 1 to 2 and continue to holdthe Timer (A) knob onto the Clock (C) setting, turn theAdjusting (B) knob clockwise to ‘ON’, the ‘Key’ symbolwill disappear and the left-hand oven is enabled.Setting the 6-button Clock (Classic & Kitchener)1. The 6-button LCD clock is shown in Fig. 2.39. When theclock is first connected the display flashes ( 0.00 ) and() alternately.2. Press and hold both the [] and [] buttons down(Fig. 2.40). Now press the [+] button (or the [–] button)until the correct time shows.3. Do not forget that it is a 24-hour clock.4. If you need to reset the cooker, turn off the power supplyand wait for a couple of minutes and start again.Setting the Minute Minder1. Press and hold the [] button (Fig. 2.41), and then pressthe [+] button until the length of time you want to cookfor is shown (Fig. 2.42).2. You can check the time remaining by pressing []. Whenthe beeper sounds cancel it by pressing [].• The ‘cook period’, which is the length of time youwant the oven to cook for.• The ‘stop time’, which is the time of day youwant the oven to stop cooking.To Stop the Oven Automatically1. Press and hold the Stop Time [] button (Fig. 2.43) andthen press the [+] button (or [–] button) until the required‘stop time’ shows (Fig. 2.44). AUTO will show in thedisplay.2. Once the ‘stop time’ is reached, the beeper sounds. Tostop the beep turn the oven control knob to 0 first andthen press [] once; press [] again to return to manualcooking.To Start and Stop the Oven AutomaticallyBefore you set the clock you must have two numbers clearlyin mind – the ‘cook period’ and the ‘stop time’.Note: You cannot set a start time directly – this is setautomatically by setting the ‘cook period’ and the ‘stop time’.1. Press and hold the [] button (Fig. 2.45) and then pressthe [+] button (or [–] button) until the required ‘cookperiod’ shows (Fig. 2.46)2. Now press and hold the [] button (Fig. 2.47) and thenpress the [+] button (or [–] button) until the required ‘stoptime’ shows (Fig. 2.48). Release the buttons.3. AUTO will now show in the display.4. Set the oven to the required temperature. When cookingis finished the beeper will sound. Turn the oven knobto the OFF position first, and then press the [] buttononce to stop the beep; press it again to return to manualcooking.ArtNo.302-0001 - 6-button clockArtNo.302-0003 - 6BCminute minder setting 1 ArtNo.302-0004 -Minute minder setting 2ArtNo.302-0005 -6BC Stopping the oven 1ArtNo.302-0002 - 6BC annotatedA B C D E FA – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time,D – Manual, E & F – Time setting buttonsArtNo.302-0005a -6BC Stopping the oven 1aArtNo.302-0006 - 6BCsetting the cook timeArtNo.302-0006 - 6BCsetting the cook timeArtNo.302-0005 -6BC Stopping the oven 1ArtNo.302-0005a -6BC Stopping the oven 1aFig. 2.39Fig. 2.40Fig. 2.41Fig. 2.43Fig. 2.45Fig. 2.47Fig. 2.42Fig. 2.44Fig. 2.46Fig. 2.48