Rangemaster Classic Deluxe 100 User's Manual & Installation Instructions

Rangemaster Classic Deluxe 100 User's Manual & Installation Instructions Manual pdf 33 page image

INSTALLATIONCheck the appliance is electrically safe when you have finished.29ArtNo.130-0010 Electrical connections single-phaseLN230 V ac 50 Hz10 mm² max6 mm² maxL1NL3L23N ac230/400 V 50 Hz6 mm² max10 mm² max6 mm² maxElectrical ConnectionThe cooker must be installed by a qualified electrician, inaccordance with all relevant British Standards/Codes ofPractice (in particular BS 7671), or with the relevant nationaland local regulations.Current Operated Earth Leakage BreakersThe combined use of your cooker and other domesticappliances may cause nuisance tripping, so werecommend that the cooker is protected on an individualRCD (Residual Current Device) or RCBO (Residual CurrentBreaker with Overload).IF IN DOUBT, PLEASE CONSULT A SUITABLYQUALIFIED ELECTRICIAN.nn WARNING: THE APPLIANCE MUST BE EARTHED.Note: The cooker must be connected to the correct electricalsupply as stated on the voltage label on the cooker, througha suitable cooker control unit incorporating a double-poleswitch, having a contact separation of at least 3 mm in allpoles.nn The cooker MUST NOT be connected to an ordinarydomestic power point.Access to the mains terminal is gained by removing theelectrical terminal cover box on the back panel. Connect themains cable to the correct terminals for your electrical supplytype (Fig.7-8 and Fig.7-9). Check that the connections arecorrectly fitted and that the terminal screws are tight. Securethe mains cable using the cable clamp.Final ChecksHob CheckCheck each cooking zone in turn. Be sure to use pans of thecorrect size and material.Grill CheckTurn on the grill control and check that the grill heats up.Oven CheckSet the clock as described earlier, and then turn on the oven.Check the oven fans start to turn and that the oven heats up.Fig.7-8Fig.7-9