Rangemaster Longstock Deluxe User's Manual & Installation Instructions

9nn This is a built-in safety device.Deactivate the Power Boost function by turning the controlknob to a lower setting.The Bridging-Zone Function,Zones A and B can be bridged, creating an area, ideal for usewith an induction griddle (optional extra).Note: The griddle should comprise of an induction friendly,flat bottom, large enough to cover zones A and B of thehotplate heating area (Fig. 2.9).DO NOT use zones C, D or E to heat the griddle (Fig. 2.10).To activate the bridging-zone function, simultaneously turnthe two left-hand controls completely clockwise (Fig. 2.11)and hold until the [ ] symbols appear in the centre of thehob control display (Fig. 2.12). The temperature can then beadjusted using the left-hand knob (Fig. 2.13).Turn both knobs counter-clockwise to cancel the functionand return to normal operation.nn DO NOT turn the two left-hand knobs individuallyto heat the griddle. This can cause excessivetemperatures and damage the coating on thegriddle.Overheat FunctionThis function identifies when the temperature of the pan risesrapidly and works to maintain a safe level of pan temperature.It should not interfere with normal cooking.Cookware with bases that become distorted (Fig. 2.2) whenheated may interfere with the operation of the OverheatFunction. This may result in damage to your cookware orInduction Glass Hob.nn Please remember not to leave the hob unattended.Care should be taken to not allow your cookware toboil dry. Damage to your cookware and InductionGlass Hob may result.Please read and follow the manufacturers’ instructionscarefully before using cookware on your induction hob.ABCEDFig. 2.9Fig. 2.10Fig. 2.11Fig. 2.12Fig. 2.13