25INSTALLATIONCheck the appliance is electrically safe and gas sound when you have ffinished.3 pan supports Wok cradleArtNo.110-0002 110 pan supportsArtNo.000-0009 Wok ring, castGriddle Grill pan and trivet3 flat shelves 1 drop shelfHandyrack Roasting tinArtNo.324-0003 HandyrackArtNo.324-0004 Roasting tinPlinthLocation of CookerThe cooker may be installed in a kitchen/kitchen diner butNOT in a room containing a bath or shower.This appliance is designed for domestic cooking only. Usefor any other purpose could invalidate any warranty orliability claim.Note: An appliance for use on LPG must not be installedin a room or internal space below ground level, e.g. in abasement.ConversionThis appliance is supplied set for G20 20 mbar Cat II2H3+.A conversion kit for another gas is available for the cooker onrequest.If the appliance is to be converted to another gas werecommend that this is carried out before installation.After converting the appliance, please attach the GasConversion sticker over the appropriate area of the databadge – this will identify the gas type for which the applianceis now set.You will need the following equipment to complete thecooker installation satisfactorily:• Stability bracket: If the cooker is to be supplied withgas through a flexible hose, a stability bracket or chainMUST be fitted.These are not supplied with the cooker but areavailable at most builders’ merchants.• Gas pressure tester/manometer.• Flexible gas hose: Must be in accordance with therelevant standards.• Multimeter: For electrical checks.You will also need the following tools:1. Electric drill2. Masonry drill bit (only required if fitting the cooker on astone or concrete floor)3. Wall plugs (only required if fitting the cooker on a stoneor concrete floor)4. Steel tape measure5. Cross head screwdriver6. Flat head screwdriver7. Spirit level8. Pencil9. Adjustable spanner10. Screws for fitting stability bracket11. 13 mm spanner or socket wrenchChecking the parts: