Rangemaster Nexus 110 Induction User's Manual & Installation Instructions

Also see for Classic: User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions

Rangemaster Nexus 110 Induction User's Manual & Installation Instructions Manual pdf 19 page image

15N WARNING! Refer to Before You Start... chapter.Using the ClockYou can use the clock to turn the left-hand oven on and off.Note: When using the timer functions, first set the clock asrequired before setting the oven temperature.The oven can be switched on when the cook symbol [ ] isdisplayed.Setting the Clock1. The LCD clock is shown in (Fig. 2.18). Once the cooker isconnected and switched on, the display flashes (00.00 )and the time starts from (00.00 ).2. To set the clock press the [+] and [-] buttonssimultaneously, the point between hours and minuteswill start to flash for 5 seconds. Whilst the point isflashing press either the [+] or [-] button to set thecorrect time.IMPORTANT: The timed oven will not operate unless theclock has been set.Program Selection - Setting the Minute MinderThe minute minder [ ] provides the ability to set acountdown from 00.01h to 23.59h, at the end of which analarm will sound.1. Press the mode [M] button once (Fig. 2.19). The bellsymbol ( ) will flash on the display. Select the desiredcountdown from 00.01h to 23.59h using the [+] button(Fig. 2.20). The countdown will automatically begin andthe ( ) symbol will show in the display.2. Once the specified time has elapsed an alarm willsound.3. To stop the alarm press any button.Re-set the Minute MinderTo re-set the minute minder, first select the minute minderprogram by pressing the mode [M] button. Then press the[+] and [-] buttons simultaneously.• The ‘cook period’, which is the length of time youwant the oven to cook for (dur).• The ‘stop time’, which is the time of day you wantthe oven to stop cooking (End).To Stop the left-hand Oven at a Specific Time of Day1. Press the mode [M] button 3 times, until the displayflashes (End) (Fig. 2.21).2. Select the ‘stop time’ using the [+] or [-] buttons. Thedisplay will show the current time along with the AUTOand Cooking symbols (Fig. 2.22).3. When the ‘stop time’ is reached an alarm will sound andthe oven will stop working. The word AUTO will flash onthe display (Fig. 2.23).4. Press any button to stop the alarm and return tomanual cooking. If the alarm is not stopped, it will stopautomatically after 7 minutes.ArtNo.306-0001 - 3-button clockArtNo.306-0001 - 3-button clockArtNo.306-0001 - 3-button clockArtNo.306-0001 - 3-button clockArtNo.306-0001 - 3-button clockArtNo.306-0001 - 3-button clockTOP TIPBy pressing the mode [M] whilst Minute Minder is countingdown, it is possible to see time remaining or adjust thecountdown time using the [+] or [-] buttons.Fig. 2.18Fig. 2.19Fig. 2.20Fig. 2.21Fig. 2.22Fig. 2.23