Rangemaster Professional+ 90 Gas User's Manual & Installation Instructions

Also see for Professional+ 90 Gas: Installation and user guide User guide User's guide & installation instructions User's guide & installation instructions Installation and user guide

11ArtNo.301-0012 2BCActivating the key lock 2A BCTo Start and Stop the Multifunction OvenThe Multifunction Oven allows you to automatically start andstop by a combination of the length of the cooking time andthe stop time. Giving you the flexibilty to cook casseroles etcwhile you are out. You cannot set the actual start time.1. Turn the Timer (A) knob to the Cook Time (F) setting.Turn the Adjusting (B) knob clockwise to set the lengthof the cooking time required e.g. 50 seconds (Fig. 2.36).2. Turn the Timer (A) knob to the Stop Time (G) setting(Fig. 2.37). The display will show the current time of dayplus the ‘cook time’ you just set.3. Continue to turn the Adjusting (B) knob to the amountof time required e.g. 1 minute (Fig. 2.38).4. Set the Multifunction Oven to the required cookingtemperature and function mode.5. Turn the Timer (A) knob to the Auto (H) setting (Fig.2.38). If the display shows the current time and the word‘AUTO’ the Multifunction Oven is set to turn on and off.6. When the program starts the Multifunction Oven, the‘Cooking’ symbol will appear on the display. Once thespecified time has elapsed it will emit an alarm and theMultifunction Oven will stop working. The ‘Cooking’symbol on the display will disappear and the word‘AUTO’ will flash (Fig. 2.39).7. Once the specified time has elapsed it will emit an alarm.There are two ways to cancel the alarm:I. Turn the Adjusting (B) knob counter-clockwise orclockwise (Fig. 2.40).II. Turn either the Timer (A) knob to the Clock (C) or tothe Minute Minder (E) setting. Return to Manual (D)for normal cooking mode (Fig. 2.40).Reset to Manual CookingTo cancel any automatic settings turn the Timer (A) knob tothe Clock (C) setting and release (Fig. 2.41).Key LockThe Key Lock will activate and deactivate the left-hand oven.The right-hand tall oven can be operated as usual.1. Cancel any active programs. Refer to ‘Reset to ManualCooking’.2. Turn the Timer (A) knob to the Clock (C) setting and holdfor approx 8 seconds. The display will show ‘ON’ (Fig.2.42).3. Continue to hold the Timer (A) knob onto the Clock (C)setting, turn the Adjusting (B) knob clockwise, the ‘OF‘and the ‘Key’ symbol will display (Fig. 2.43). The left-hand oven is now locked.4. To activate repeat steps 1 to 2 and continue to holdthe Timer (A) knob onto the Clock (C) setting, turn theAdjusting (B) knob clockwise to ‘ON’, the ‘Key’ symbolwill disappear and the left-hand oven is enabled.Art No. 301-0011 2BCActivating the key lock 1A BCArtNo.301-0010 2BCSetting the cooking timeA BFFig. 2.36ArtNo.301-0008 2BCStopping the oven 2GA BArtNo.301-0008 2BCStopping the oven 2HA BArtNo.301-0007 2BCStopping the oven 1DA BECArtNo.301-0007 2BCStopping the oven 1A BCArtNo.301-0007 2BCStopping the oven 1DA BFig. 2.37Fig. 2.38Fig. 2.39Fig. 2.40Fig. 2.41Fig. 2.42 Fig. 2.43