Rangemaster Professional+ User Manual

Also see for Professional+: User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions

7The ClockYou can use the timer (Fig.2-20) to turn the left-hand ovenon and off. The clock must be set to the time of day before theovens will work.Note: When using the timer functions, first set the clock asrequired before setting the oven temperature and selectingthe oven function (multi-function ovens only).Setting the time of dayWhen the clock is first connected, the display flashes ( 0.00)and () alternately.To set the time, turn and hold the Timer knob to the clocksymbol () and at the same time turn the Adjusting knob leftor right until the clock shows the time of day.Remember this is a 24-hour clock.Let go of the Timer knob and it will spring back to the vertical,oven manual setting.IMPORTANT: The cooker will not operate unless the clockhas been set.Note: When using a multi-function oven, first set the clock asrequired before selecting the oven function and setting thetemperature.Minute MinderTurn the Timer knob to the right to the () minute mindersetting – it should click into position (Fig.2-21).Use the Adjusting knob to set the time you need (Fig.2-22).You can either turn the knob back to the vertical manualsetting () to keep an eye on the time of day, or leave it in the() minute minder position as the time ticks down.To stop the beeper when it sounds, turn the Adjusting knobanti-clockwise.• The ‘cook period’, which is the length of time you wantthe oven to cook for.• The ‘stop time’, which is the time of day you want theoven to stop cooking.To stop the ovens at a specific time of dayTurn the Timer knob to the () position (Fig.2-23).Use the Adjusting knob to set the time at which the oven(s) isto stop. You can set the oven to turn on at any time over thefollowing 24-hour period. AUTO shows in the display(Fig.2-24).Turn the Timer knob to the ‘AUTO’ setting to return to theclock display.Once the set time is reached, the beeper sounds. Turn theTimer knob to the vertical () to return to manual cooking.To start and then stop the ovens using theTimerBefore you set the clock, decide on both the ‘cook time’ andthe ‘stop time’.ArtNo.300-0004 2-button clock annotated� �A – Timer knob, B – Adjusting knobFig.2-20ArtNo.300-0005 2BCminute minder settingArtNo.300-0006 2BCminute minder setting 2ArtNo.301-0007 2BCStopping the oven 1 ArtNo.301-0008 2BCStopping the oven 2Fig.2-21 Fig.2-22Fig.2-23 Fig.2-24