Rangemaster RMB7248BL/SS User Manual & Installation & Service Instructions

Also see for RMB7248BL/SS: User guide User guide

Contents

19INSTALLATIONCheck the appliance is electrically safe when you have nished.Electrical ConnectionThis appliance must be installed by a qualified electricianto comply with the relevant Institute of Engineeringand Technology (I.E.T.) regulations and also the localelectricity supply company requirements. WARNING: THIS APPLIANCE MUST BE EARTHEDNote: The appliance must be connected to the correctelectrical supply as stated on the voltage label onthe appliance, through a suitable cooker control unitincorporating a double pole switch having a contactseparation of at least 3mm in all poles. This appliance mustnot be connected to an ordinary domestic power point.The mains terminal is situated on the back of the oven(Fig. 10.8).Connect the cable to the correct terminals. Check that thelinks are correctly fitted and that the terminal screws are tight.Secure the mains cable using the cable clamp.Ensure the cable route avoids the risk of trapping or touchinghot surfaces.Current Operated Earth Leakage BreakersWhere the installation is protected by a 30mA sensitivityresidual current device (RCD), the combined use of yourappliance and other domestic appliances may occasionallycause nuisance tripping. In these instances the kitchen circuitmay need to be reconfigured. This work should be carried outby a qualified electrician.LevellingThe worktop should already be fitted and levelled, and thecabinets mounted 90° to the worktop. It is only necessary toensure the top front edge of the appliance unit supports thefront edge of the worktop and line up the appliance trimswith the doors.Customer CarePlease complete your contact details in the front of thissection. Please inform the user how to operate the applianceand hand over the instruction pack.Thank you.ArtNo.130-0007 - BI ovenelectrical connections220 - 240V1 2 3RLPE4 5NLEN1 42 53Fig. 10.8