Ransomes Highway 3 Safety, Operation & Maintenance Manual

Also see for Highway 3: Quick start guide

Contents

Ransomes Highway 3 Safety, Operation & Maintenance Manual Manual pdf 43 page image

en-416 CONTROLS78XYZA96.10 LIGHTING KIT (Optional)___________________________________________Lighting control StalkA Push away from operator to turn main beam on.B Pull towards operator to flash headlights.C Move stalk up to indicate right turn.D Move stalk down to indicate left turn.E Push stalk in to sound horn.NOTE: Side lights will operate when ignition is in the runpositionWhen the lighting kit is fitted a brake light function isavailable. If brake lights are used rear view mirrors mustbe fitted.6.11 SEAT RIGHT HAND ARM REST & POD ______________________________The right hand arm rest of the seat has an extensionmounted to it which carries the control pod.To obtain a comfortable operating position:a Release hand wheel (A).b Using both hands grip the arm rest and lift or lowerthe arm rest. It will move in a circular motion (X)either moving up and forward or down andrearwards.c When the desired position is obtained lock bytightening the hand wheel (A).The pod can be pivoted in the horizontalplane (Y), independently of the arm rest by:d loosening the three screws (4) holding the pod to the arm rest extension.e Swivel pod to desired position.f Tighten the three screws 4).The whole arm rest extension can be pivoted in the horizontal plane (Z).g Remove the arm rest cushion by removing the four screws (9).h Loosen the three locknuts (7) fitted to studs (8).j Swivel the arm rest extension to the desired position.k Replace arm rest cushion and secure with screws (9)BACDE