en-154 SPECIFICATION4.6 VIBRATION LEVEL ______________________________________________When the machine was tested for hand/arm vibration levels, the operator was in the normal operatingposition with both hands on the steering mechanism. The engine was running and the cutting device wasrotating with the machine stationary.The Machinery Safety Directive 2006/42/ECBy compliance to:The Lawnmower Standard EN836:1997Referenced to Hand/Arm: BS EN ISO20643:2008Information Supplied for Physical Agents Directive 2002/44/ECBy reference to:Hand/Arm Standards: BS EN ISO 5349-1 (2001)BS EN ISO 5349-2 (2001)When the machine was tested for Whole Body vibration levels. The operator was seated in the normaloperating position with both hands on the steering mechanism. The cutting device was rotating with themachine driven in a straight line at 6 Km/hr on a level freshly cut lawn.The Machinery Safety Directive 2006/42/ECBy compliance to:Whole Body EN1032:2003Information Supplied for Physical Agents Directive 2002/44/ECBy reference to:Whole Body Standards BS EN ISO 2631-1 (1997)Ransomes Marquis 61Series:EG3Whole Body AccelerationlevelMax LH or RH FootAccelerations m/s²Mean Value of X, Y, Z Aeq1.10 ±1.3Ransomes Marquis 61Series:EG3Whole Body AccelerationlevelMax SeatAccelerations m/s²Mean Value of X, Y, Z Aeq1.58 ±1.3Ransomes Super Certes 51Series:EC3Hand / Arm AccelerationlevelMax. LH or RHAccelerations m/s²Mean Value of X, Y, Z Aeq5.28 ±1.3Ransomes Super Certes 61Series:JGHand / Arm AccelerationlevelMax. LH or RHAccelerations m/s²Mean Value of X, Y, Z Aeq2.75 ±1.3Ransomes Super Bowl 51Series:JFHand / Arm AccelerationlevelMax. LH or RHAccelerations m/s²Mean Value of X, Y, Z Aeq3.65 ±1.3Ransomes Marquis 51Series:EF3Hand / Arm AccelerationlevelMax. LH or RHAccelerations m/s²Mean Value of X, Y, Z Aeq4.00 ±1.3Ransomes Marquis 61Series:EG3Hand / Arm AccelerationlevelMax. LH or RHAccelerations m/s²Mean Value of X, Y, Z Aeq5.00 ±1.3