Rapid-Air AIR FEED A series Operating Instructions Manual
               | |
11TROUBLESHOOTING13. Over feeding.a. Stock is excessively dirty or oily.b. Feed is operating too fast. Turn speed adjusting screwclockwise to slow feed down.c. Stock has large slitting burr. Check clearance betweenclamps and stock.d. Stock and feed clamps may be loose.14. Slide block will move out but will not return without hesitation.a. Check speed adjusting screw (item #67).b. Check pilot operated valve (item #39). Swollen "O" ringcould be binding, until pressure build up breaks it free.Check poppet (item #40).15. Feed acts sluggish on start up, acts fine after running for a while.a. Check pilot operated valve (item #39) for "O"ring binding.Valve should move freely in cartridge (item #32)Section through cartridge in Rapid-Air feed39PILOTOPERATEDVALVE 40POPPET32 CARTRIDGE |
manualsdatabase
Your AI-powered manual search engine